Marine antifouling paint designed to limit hull fouling and keep cruising performance steady. Saves time on routine maintenance and reduces the need for frequent scrubbing between haul-outs. Is Flag Paints Cruising Antifouling Paint the right choice for freshwater and low-fouling UK conditions?
⚡ At a Glance
- • Coverage: Approximately 10 square metres per litre, economical for larger hulls
- • Best for: Owners of cruisers and trailer-sailers running at up to 8 knots in low fouling or fresh water
- • Not ideal for: Vessels regularly operating above 8 knots or in high fouling areas
Self eroding antifouling suitable for craft up to 8 knots in low fouling areas or fresh water. Apply two coats and an additional coat on the waterline for recommended protection.
Longer periods between reapplications, thanks to self eroding antifouling
Formulated as a self eroding coating and intended for use on craft up to 8 knots in low fouling areas or fresh water. Application guidance calls for two coats and an additional coat at the waterline to maintain effective coverage.
Reduced barnacle and weed build-up for slow cruisers, meaning less time spent on cleaning and fewer haul-outs for routine maintenance.
Lower local environmental impact, with no booster biocides
The formulation does not contain booster biocides, a choice made to reduce environmental impact in sensitive waters. The absence of booster biocides is stated explicitly in the product description.
Safer option for marinas and inland waterways where biocide load is a concern, while still supplying antifouling protection suited to low fouling conditions.
Economical coverage, with approximately 10 square metres per litre
Spread rate is given as roughly 10 square metres per litre, and the available container size is 2.5 litres. Following the two-coat recommendation yields substantial area covered per can.
Good value for owner-cruisers and trailer-sailers, as generous coverage reduces material usage and overall maintenance expense.
✨ The 4 Key Reasons for Flag Paints Cruising Antifouling Paint
- Self eroding formula - Extends effective protection between reapplications for slow cruisers
- No booster biocides - Reduces added biocide load, better for sensitive waterways
- High coverage rate - Approximately ten square metres per litre, lowers material use
- Waterline extra coat recommendation - Ensures tougher protection where fouling concentrates during berthing
📋 Technical Details at a Glance
- Category: Cruising antifouling paint
- Brand: Flag Paints
- Product type: Self eroding antifouling
- Colour: Red
- Volume: 2.5 Ltr
❓ Frequently Asked Questions
Q: How many coats should be applied?
A: Apply two coats and an additional coat on the waterline, as stated in the product description.
Q: Is this suitable for fast or offshore boats?
A: Suitable for craft up to 8 knots in low fouling areas or fresh water, so not designed for sustained higher speeds or heavy fouling conditions.
Q: Does the formulation contain booster biocides?
A: No, the formulation does not contain booster biocides, a choice intended to reduce environmental impact.
🏆 Our Verdict
Ideal for owner-cruisers and inland boaters who operate at modest speeds in low fouling conditions. The combination of a self eroding formula and the absence of booster biocides makes it a practical, lower-impact choice. Affordable and economical coverage delivers solid long-term value for routine antifouling maintenance.
