Replacement plane iron for home improvement, promising a flat, 25-degree edge prepared for honing. Woodworkers and hobbyists save setup time and get dependable seating with STANLEY Replacement Plane Irons. Is this the sensible spare to keep a workshop running without unnecessary downtime?
⚡ At a Glance
- • Cutting Quality: Flat, 25-degree ground edge for predictable sharpening and consistent shavings
- • Best for: Woodworkers and carpenters replacing worn 40mm irons in compatible block planes
- • Not ideal for: Owners of non-compatible plane models or those needing a different bevel angle
A 40mm replacement plane iron with a flat ground edge set at 25 degrees. Designed to fit specific 1-12-020 and 1-12-220 block planes and arrive ready for honing.
Quicker sharpening, with a flat 25-degree ground edge
The cutter is ground flat to a 25-degree bevel, creating a uniform contact surface that reduces uneven wear during honing. The accurate factory grind means only light honing is needed to establish a working edge.
Less time spent setting bevel angle and more time planing; users can establish a sharp edge quickly with minimal initial work.
Secure seating, with 40mm sizing matched to specified block planes
The blade measures 40mm in length and is produced to fit block plane models identified as 1-12-020 and 1-12-220. Precision dimensions help ensure correct alignment and seating in the plane iron bed.
Proper fit reduces blade movement and chatter, producing smoother passes and fewer tear-outs when planing timber.
Longer edge life, with an accurately ground edge and consistent finish
A consistent flat grind reduces high spots that can wear prematurely, so the bevel retains a true geometry through multiple hones. User feedback indicates the blade holds a working edge well after sharpening.
Fewer re-sharpening sessions are needed over time, meaning more uninterrupted work and lower maintenance effort in the workshop.
✨ The 4 Key Reasons for STANLEY Replacement Plane Irons
- Longer Edge Life - Keeps edge sharp longer, cutting down sharpening time
- Works Where Others Fail - Seats securely in tight tolerances, avoiding rework and vibration
- Consistent Cutting After Sharpening - Delivers repeatable, predictable cutting after every sharpening session
- Limited Lifetime Warranty - Backed by Stanley warranty for long-term workshop confidence
📋 Technical Details at a Glance
- Category: Replacement plane iron
- Brand: STANLEY
- Length: 40mm
- Bevel/Edge angle: Ground to 25 degrees
- Edge finish: Flat ground surface for easier sharpening
❓ Frequently Asked Questions
Q: Will these fit my plane?
A: They are made to fit block plane models 1-12-020 and 1-12-220 and measure 40mm in length, so check your plane's compatibility with those model numbers.
Q: Do the irons arrive ready to use?
A: Each cutter is supplied ground to a 25-degree bevel and flat-ground for easier honing, so only light honing is normally required before use.
Q: Is there any warranty?
A: Stanley's limited lifetime warranty covers the replacement plane iron as stated in the product descriptions.
🏆 Our Verdict
Ideal for hobbyist and professional woodworkers who need a dependable 40mm replacement for compatible block planes. The accurately ground 25-degree flat edge arrives ready for honing, reducing setup time and helping deliver consistent cuts. The limited lifetime warranty and proven edge retention offer sensible long-term value for regular users.
