Workshop accessory for controlled drilling, the Wolfcraft Drill Stand helps achieve straight, repeatable holes. Confident, tidy results reduce wasted material and rework for DIYers and tradespeople. Is the stand the right upgrade when millimetre-accurate depth control matters?
⚡ At a Glance
- • Drilling Accuracy: Millimetre-precise depth control and a rigid column with toothed rack keep holes straight
- • Best for: Hobbyists, woodworkers and tradespeople needing repeatable, accurate drilling
- • Not ideal for: Drills without a 43-mm Euronorm neck are incompatible with the collar system
Euronorm collar Ø 43 mm accepts customary drills with a 43-mm Euronorm neck, while a 40 mm round column with a 420 mm toothed rack keeps the drill straight. Depth stop with quick adjuster and a scale ring allows drilling depth to be set precise to the millimetre.
Straight, wobble-free holes - with a 40 mm round column and 420 mm toothed rack
The 40 mm round column guides the drill while the screwed-on 420 mm toothed rack creates a stable linear feed, preventing twisting during downward motion. The rack engages evenly with the feed mechanism to maintain alignment.
Consistently straight holes reduce the need for rework and make jigs and repeats far more reliable. Suitable for drilling through wood, plastics and workshop projects that demand accuracy.
Repeatable depth control - thanks to the depth stop with quick adjuster and scale ring
A depth stop assembly with a quick-adjust mechanism and a scale ring permits fine position changes and clear visual reference in millimetres. The adjuster locks securely to hold the set depth under load.
Set identical hole depths across multiple workpieces without measuring each time. Saves time on batch tasks and ensures consistent results for dowelling, shelf pins or stop-through holes.
Broad drill compatibility - with Euronorm collar Ø 43 mm
Euronorm collar Ø 43 mm accepts all customary drills fitted with a 43-mm Euronorm neck, creating a straightforward interface between hand drills and the stand. Collar clamping keeps the drill concentric with the column.
Most standard hand drills used in workshops slot in and perform reliably, avoiding the need for brand-specific chucks or adapters. Quick swap of drills makes the stand practical for mixed tasks.
✨ The 4 Key Reasons for Wolfcraft Drill Stand
Robust build - Withstands regular workshop knocks while keeping alignment consistent
Quick-adjust depth stop - Set repeatable hole depths within a millimetre from job to job
Universal Euronorm collar - Fits most drills with a 43-mm Euronorm neck for easy compatibility
Stable feed action - Toothed rack and column combine to prevent twisting during drilling
📋 Technical Details at a Glance
- Category: Home Improvement
- Brand: Wolfcraft
- Product ID: B003TWVBEA
- Compatibility: Euronorm collar Ø 43 mm for drills with 43-mm Euronorm neck
- Column diameter: 40 mm round column
❓ Frequently Asked Questions
Q: Will my drill fit the stand?
A: The collar uses an Euronorm Ø 43 mm interface, so drills with a 43-mm Euronorm neck are compatible. Drills without that neck size will not fit the collar.
Q: How accurate is the depth control?
A: Depth control uses a stop with a quick adjuster and a scale ring, allowing depth settings precise to the millimetre. The adjuster locks the position to keep the same depth across multiple holes.
Q: Can the stand prevent the drill from twisting?
A: A 40 mm round column combined with a 420 mm toothed rack guides the feed and ensures straight drilling, reducing the risk of twisting during operation.
🏆 Our Verdict
The stand suits DIYers, woodworkers and tradespeople who require repeatable, accurate drilling. A 43-mm Euronorm collar, a 40 mm column with a 420 mm toothed rack and a millimetre-scale depth stop deliver straight holes and precise depth control. Although typically more costly than the simplest mounting jigs, robust construction and easy setup offer strong long-term value for workshop use.
