Home improvement accessory for dust extraction that keeps hose runs neat at corners. Charnwood Dust Extraction Elbow helps reduce clutter and trip hazards for anyone who spends time in a workshop. Is a simple elbow the most effective way to manage extraction hose runs?
⚡ At a Glance
- • Airflow Efficiency: Routes hose through 90-degree corners, avoiding long external runs
- • Best for: Workshops and tradespeople using 100mm diameter extraction hose
- • Not ideal for: Systems using hoses with a diameter other than 100mm
A 90-degree elbow designed for use with 100mm diameter extraction hose. Two 100mm hose clamps are required to fasten the hoses securely.
Tidy hose routing - with a 90-degree elbow
The 90-degree elbow connects two lengths of 100mm hose to change direction at corners, removing the need to run hose around an obstacle. Two clamp points secure each end of the connection.
Neater hose runs free up floor space and reduce trip hazards in a busy workshop.
Secure connections - with specified 100mm hose clamps
Both ends accept 100mm diameter hose and require two 100mm hose clamps to fasten hoses firmly. Clamps hold the joint tight under normal extraction suction.
Clamped joints stay in place during use, reducing the risk of loosening or short-term detachment.
Clear sizing - with dedicated 100mm diameter fit
Designed for use with 100mm diameter hose only, with alternative sizes available separately. The model designation confirms the intended hose diameter.
Straightforward compatibility makes matching to an existing extraction system quick and reliable.
✨ The 4 Key Reasons for Charnwood Dust Extraction Elbow
- Compact 90° form — Keeps extraction runs close to walls, freeing valuable workspace
- Requires two 100mm clamps — Creates a robust mechanical joint for extraction hoses
- Dedicated 100mm fit — Matches common workshop hose sizes without adapters
- Available in other sizes — Lets users choose the right diameter for different systems
📋 Technical Details at a Glance
- Category: Home Improvement
- Application: Dust extraction hose routing at corners
- Compatible hose diameter: 100mm
- Angle: 90 degrees
- Hose clamps required: Two 100mm hose clamps
❓ Frequently Asked Questions
Q: Will this fit my existing extraction hose?
A: Fits 100mm diameter hose only, so check the hose diameter before purchasing.
Q: How do I fasten the hose to the elbow?
A: Two 100mm hose clamps are required to fasten the hoses securely to each end of the elbow.
Q: Can the elbow be used to avoid running hose around corners?
A: Yes, the elbow is designed to allow hose to turn corners instead of running the hose around the outside of a corner.
🏆 Our Verdict
Suitable for workshops and tradespeople who use 100mm extraction systems and want neater hose runs. The 90-degree form and requirement for secure 100mm clamps deliver reliable corner routing and sound mechanical joints. Costs vary, but straightforward construction and availability in other sizes make it a practical long-term addition to an extraction setup.
