Home lighting designed for low-voltage recessed installs with a neat, compact profile. Knightsbridge Low Voltage Downlight gives homeowners and installers reassurance through pressed-steel construction and MR16/LED compatibility. Is the compact fitting the right choice for tight ceiling voids and separate transformer requirements?
⚡ At a Glance
- • Light Quality: Dependent on MR16 lamp choice, beam angle and colour temperature vary
- • Best for: Home renovators and electricians fitting low-voltage recessed lighting
- • Not ideal for: Large open-plan rooms needing wide, diffuse illumination
A compact low-voltage downlight with a pressed-steel body and shallow recessed profile. Requires a separate 12V transformer and accepts MR16 and many LED retrofit lamps.
Secure ceiling grip – with spring clip lamp fixing
Spring clip fixings engage behind the cut-out to hold the fitting firmly in place without separate screws. Recommended maximum ceiling thickness for the clips is 15mm.
Secure mounting simplifies retrofits and replacements, keeping the downlight flush against the ceiling. Installers benefit from faster fitting times and reduced need for additional brackets.
Dimmable ambience – with electronic transformer compatibility
Dimmable operation requires an electronic transformer, not supplied with the fitting; a 12V 60VA transformer (T02) is specified for use. Appropriate transformer selection affects dimming smoothness and compatibility with LED MR16 lamps.
Adjustable brightness creates flexible mood lighting when paired with a compatible transformer. Perfect for bathrooms and living spaces where different lighting levels are useful.
Flexible lamp choice – with MR16 lamp holder and LED compatibility
Standard MR16 lamp holder accepts common MR16 halogen lamps and many MR16 LED retrofit bulbs, and the fitting is supplied complete with a bridge and lamp holder. The enclosure is open, allowing straightforward access for wiring.
Choose beam angle and colour temperature to suit each room by swapping MR16 lamps. Retrofit options let users upgrade to LED for lower running power while keeping the same downlight.
✨ The 4 Key Reasons for Knightsbridge Low Voltage Downlight
- Pressed steel construction — Durable housing resists dents and warping during installation
- Complete with bridge and lamp holder — Simplifies rewiring and secures MR16 lamp connections reliably
- Dimmable with electronic transformer — Enables smooth brightness adjustment with compatible 12V transformers
- Recommended ceiling void 130mm — Fits standard loft spaces and shallow joist cavities easily
📋 Technical Details at a Glance
- Category: Home downlight
- Lamp type: MR16 (lamp supplied separately)
- Transformer requirement: 12V 60VA transformer (T02) required
- Dimmable: Dimmable with compatible electronic transformer (not supplied)
- Material: Pressed steel construction
❓ Frequently Asked Questions
Q: Can the downlight be used with LED lamps?
A: Yes, the description states LED compatibility and the MR16 lamp holder accepts many MR16 LED retrofit bulbs.
Q: Is a transformer included with the fitting?
A: No, a separate 12V 60VA transformer (T02) is required and is not supplied with the fitting.
Q: What cut-out and ceiling void dimensions are needed?
A: The cut-out size is 60mm, outer diameter 82mm, recessed depth 100mm and a 130mm ceiling void is recommended; spring clips suit ceilings up to 15mm thick.
🏆 Our Verdict
Ideal for home renovators and electricians who need a compact, low-voltage recessed downlight for retrofit situations. Robust pressed-steel construction combined with MR16 and LED retrofit compatibility makes it a flexible choice for small ceiling voids. While upfront costs and transformer selection vary, durable build and simple installation give sensible long-term value.
