End mill for metalworking promising accurate, clean cuts for aluminium and mild steel, Uxcell End Mill. Durable HSS construction and a four-flute geometry help keep edges sharp so workshop jobs finish tidier and faster. Does the 16 mm cutting diameter and 32 mm cutting depth suit your milling setup?
⚡ At a Glance
- • Cutting Quality: Sharp, consistent edges with smooth finishes on aluminium and similar metals
- • Best for: Small workshops and hobbyists needing reliable metal milling performance
- • Not ideal for: Very fine finishing passes or micro-milling tasks under 1 mm
HSS end mill with a 16 mm cutting diameter and 32 mm cutting depth. 16 mm shank and 95 mm total length supplied as a single cutter.
Cleaner aluminium cuts – Thanks to 4-flute HSS geometry
Four flutes increase the number of cutting edges in contact and assist chip evacuation, while high-speed steel resists wear under typical cutting speeds. The combination reduces built-up edge and keeps successive passes consistent.
Smoother, burr-reduced finishes on aluminium that minimise hand-deburring and speed up part-ready workflows.
Deeper single-pass milling – With 32 mm cutting depth
A 32 mm cutting depth allows deeper pockets and slotting in a single pass, reducing the need for multiple setups. Longer depths also shorten cycle times on medium-depth features.
Fewer tool changes and faster completion of pockets up to 32 mm deep, saving setup time on batch jobs.
Stable clamping and rotation – With 16 mm shank diameter
A 16 mm shank matches common collet sizes for a firm, concentric grip, limiting runout and vibration during milling. Stable rotation maintains consistent cutter geometry through each cut.
Reduced chatter and more accurate profiles, making it easier to hold tolerances during finishing passes.
✨ The 4 Key Reasons for Uxcell End Mill
- 4-flute geometry – Cleaner finishes on aluminium, enabling faster feed rates.
- HSS construction – Maintains sharp edge longer under high-speed cutting conditions.
- 16mm shank – Fits standard collets for stable, vibration-free milling operations.
- 95mm overall length – Extra reach for deeper pockets and awkward setups.
📋 Technical Details at a Glance
- Category: End Mill
- Material: HSS
- Cutting Diameter: 16 mm
- Cutting Depth: 32 mm
- Shank Diameter: 16 mm
❓ Frequently Asked Questions
Q: What material is the cutter made from?
A: High-speed steel (HSS) is the listed material, chosen for wear resistance during metal cutting.
Q: What are the cutter dimensions and shank size?
A: Cutting diameter is 16 mm, cutting depth is 32 mm, shank diameter is 16 mm and total length is 95 mm.
Q: Is the cutter suitable for aluminium work?
A: User feedback specifically notes clean cuts on aluminium, indicating suitability for aluminium milling tasks.
🏆 Our Verdict
Suitable for hobbyists and small workshops that need a robust 16 mm cutter for metalworking tasks. Durable HSS construction combined with four-flute geometry delivers lasting sharpness and smoother finishes. Good long-term value for routine aluminium and mild steel milling thanks to proven edge life and straightforward compatibility with standard collets.
