Coil roofing nailer for common shingle jobs, designed to handle a wide range of full-head nails while keeping work steady and efficient. Confidence for roofers who need consistent spacing and secure placement across a long shift. Is the 3PLUS Coil Roofing Nailer the right choice for regular roofing contractors and maintenance teams?
⚡ At a Glance
- • Nail Compatibility: Handles full-head coil roofing nails from 3/4 inch to 1 3/4 inch
- • Best for: Roofers and contractors fitting asphalt shingles on residential and light commercial roofs
- • Not ideal for: Tasks requiring brad or finishing nails, or work on delicate materials
Drives 3/4 in to 1 3/4 in full-head coil roofing nails with a 15 degree magazine angle. Built-in adjustable shingle guide, side skid pads and an interchangeable trigger support consistent, safer roofing work.
Consistent shingle spacing, with adjustable shingle guide
Adjustable shingle guide sets a repeatable spacing stop for each nail row, allowing quick mechanical alignment during installation. The guide can be moved to match typical shingle exposure without manual measurement for every course.
Faster, more uniform shingle rows mean fewer re-cuts and a neater finish. Contractors save time when laying long runs of shingles.
Safer rests on roofs, with integrated side skid pads
Integrated side skid pads sit on the tool's exterior edges where the tool meets roof surfaces, increasing friction when placed on its side. The pads reduce unwanted sliding on sloped, shingled surfaces.
Less risk of the nailer sliding off a roof during breaks, giving quieter, more controlled placement between bursts. Safer handling reduces the chance of drops and work interruptions.
Flexible firing modes, with interchangeable trigger
Interchangeable trigger lets the operator switch between single-shot operation and bumper (bump) fire without specialised tools. The mechanism accepts the alternative trigger assembly and locks into the chosen mode.
Ability to switch firing styles suits both precision work and rapid nailing across large areas. Teams can adapt the tool to personal preference and task demands on site.
✨ The 4 Key Reasons for 3PLUS Coil Roofing Nailer
- Adjustable shingle guide, ensures consistent row spacing for faster installation across the roof
- Integrated side skid pads, prevent tool sliding when placed on roofs during breaks
- Interchangeable trigger, switch between single-shot and bump fire for versatility on site
- Full-head coil compatibility, accepts 3/4 in to 1 3/4 in nails across roofing jobs
📋 Technical Details at a Glance
- Category: Coil roofing nailer
- Brand: 3PLUS
- Model: HCN45SP
- Nail Range: 3/4 in to 1 3/4 in full-head coil roofing nails
- Gauge: 11 gauge
❓ Frequently Asked Questions
Q: What nail sizes does the nailer accept?
A: Drives full-head coil roofing nails from 3/4 inch to 1 3/4 inch.
Q: Can the trigger be changed between single-shot and bump fire?
A: Yes, the trigger is interchangeable so operators can use single-shot or bumper (bump) fire depending on preference.
Q: Does the tool have any anti-slip features for use on roofs?
A: Integrated side skid pads are fitted to help prevent the nailer sliding when placed on its side on a roof.
🏆 Our Verdict
The 3PLUS Coil Roofing Nailer suits roofers and contractors who need a robust tool for laying asphalt shingles with consistent results. Adjustable spacing, skid pads and an interchangeable trigger make it a practical choice for steady, efficient roofing work. Durable design and task-focused features point to good long-term value for regular roofing teams.
