Wallcovering adhesive designed to deliver strong initial grab and a smooth finish for vinyl, textiles, hessians and polystyrene tiles. For decorators who want accurate positioning and fewer reworks, Bartoline Wallcovering Adhesive brings ready-mixed convenience and professional results. Is this adhesive the right choice for your next hanging job?
⚡ At a Glance
- • Adhesion Strength: High initial tack with lasting hold suitable for heavy and fabric-backed coverings
- • Best for: Professional decorators and DIY enthusiasts hanging vinyl, textiles or polystyrene tiles
- • Not ideal for: Unprepared damp, greasy or frost-affected surfaces without proper treatment
Hot-blended starch and PVA emulsion provides a smooth, easy-to-apply finish with a strong grab. One kilo covers approximately five square metres and tools clean up with water.
Strong Initial Hold – Thanks to hot-blended starch and PVA emulsion
A hot-blended starch combined with PVA forms a tacky emulsion that grips quickly while allowing slight slip during alignment. The balance between tack and slip reduces immediate bubbling and slippage.
High initial grab keeps vinyl and fabric-backed wallpapers in place while seams are adjusted, reducing the need for re-hanging and saving time on-site.
Broad Surface Compatibility – With formulation for vinyl, textiles and polystyrene tiles
Formulated for both paper and fabric-backed vinyl, textiles, hessians, polystyrene tiles, coving and veneers to ensure adhesion across varied wallcovering types. Compatibility removes the need to switch adhesive types between materials.
Apply one adhesive across most common coverings to simplify job planning and minimise product changes during installations.
Ready-Mixed Convenience – With straightforward application and water clean-up
Supplied ready mixed so no on-site blending is necessary; apply to the reverse of the wallcovering with a brush, roller or finely notched spatula. Accidental splashes wipe away with a damp cloth and tools wash clean with water.
Less preparation and faster tidy-up make this a practical choice for medium-sized projects and repeat decorators aiming to finish jobs efficiently.
✨ The 4 Key Reasons for Bartoline Wallcovering Adhesive
- Ready-mixed formula - Cuts preparation time and gets jobs started quickly
- Balanced tack and slip - Lets panels be repositioned before final bond sets
- Wide material compatibility - Works with vinyl, fabric-backed paper, hessians and polystyrene tiles
- Simple clean-up - Water removes splashes and keeps tools reusable
📋 Technical Details at a Glance
- Category: Wallcovering adhesive
- Brand: Bartoline
- Product ID: B01M0JN563
- Formulation: Ready mixed hot-blended starch and PVA emulsion
- Suitable for: Vinyl (paper and fabric-backed), textiles, hessians, polystyrene tiles, coving, veneers
❓ Frequently Asked Questions
Q: Can this adhesive be used on vinyl wallpapers?
A: Yes, formulated specifically for vinyl wallpapers including both paper and fabric-backed types, as well as textiles and polystyrene tiles.
Q: How much area does one kilo cover?
A: One kilo covers approximately five square metres when applied as recommended.
Q: How should the adhesive be applied and cleaned up?
A: Apply to the reverse of the wallcovering using a brush, roller or finely notched spatula; remove accidental splashes with a damp cloth and clean tools with water. Ensure surfaces are clean, dry and free from dust, grease and damp before hanging.
🏆 Our Verdict
Suitable for both DIY enthusiasts and professional decorators working with vinyl, textiles and polystyrene coverings. Ready-mixed starch and PVA formulation delivers strong initial grab, versatile adhesion and simple water clean-up. A practical, cost-effective choice that saves time and reduces waste on typical hanging jobs, offering reliable performance over the long term.
