Home Improvement solution for bilge maintenance that activates automatically to remove rising water. Peace of mind for boat owners and property managers worried about groundwater intrusion. Is the Seaflo 06 Series Bilge Pump the right choice for routine bilge defence and unattended installations?
⚡ At a Glance
- • Pumping Capacity: 750 GPH nominal flow, automatic on at 50 mm and off at 20 mm
- • Best for: Small craft owners and installations that need unattended automatic bilge control
- • Not ideal for: Situations that require pumping of engine oil or heavy fuel mixtures
Automatic activation uses a built-in switch that starts at 50 mm and stops at 20 mm. Anti-fouling impeller supports saltwater use and quiet operation for industrial-standard mounting.
Automatic water-level control - with an integrated float switch
A built-in switch activates at 50 mm and deactivates at 20 mm, combining pump and switch into a single unit so no external float switch is necessary. Dry-run tolerance allows the unit to stop when water falls below the cut-off point.
Hands-free operation removes the need for separate float hardware, making routine bilge management simpler and reducing maintenance points.
Saltwater-compatible and quiet operation - with an anti-fouling impeller
An anti-fouling impeller resists debris build-up while materials and design handle saltwater environments. Industrial-standard mounting reduces vibration and keeps audible noise low during running.
Suitable for coastal and marine use where quieter, durable pumping is preferred, keeping noise disturbance and corrosion issues to a minimum.
Resistant to false triggers from engine oil - thanks to selective activation
Switch behaviour is designed not to activate for engine oil that enters the bilge, preventing unnecessary runs when contaminants are present. Dry operation capability further reduces risk of damage from intermittent water levels.
Avoids unwanted cycling when oil is present in the bilge and reduces wear from repeated dry starts, supporting longer-term reliability.
✨ The 4 Key Reasons for Seaflo 06 Series Bilge Pump
- Built-in float switch – Eliminates separate float switch installation and wiring
- Anti-fouling impeller – Reduces clogging from debris for longer continuous runs
- Saltwater safe – Reliable operation in marine environments without rapid corrosion
- Oil-resistant activation – Won’t trigger due to engine oil, minimising false starts
📋 Technical Details at a Glance
- Brand: Seaflo
- Product ID: B01M153WKL
- Category: Bilge pump
- Flow rate: 750 GPH (nominal)
- Activation level: 50 mm
❓ Frequently Asked Questions
Q: Does the unit need a separate float switch to operate?
A: No, the unit includes an all-in-one pump and switch so a separate float switch is not required. Activation occurs at 50 mm and deactivation at 20 mm.
Q: Is the pump suitable for saltwater use?
A: Yes, saltwater safe construction and an anti-fouling impeller make it appropriate for marine environments.
Q: Will the pump run if engine oil gets into the bilge?
A: No, the design prevents activation from engine oil entering the bilge and will not trigger from oil alone.
🏆 Our Verdict
The Seaflo 06 Series Bilge Pump is well suited to boat owners and property managers who need automatic, unattended bilge control. A built-in float switch plus anti-fouling impeller and oil-resistant activation make it especially useful in saltwater and mixed-debris environments. The combination of automatic operation and durable components offers clear long-term value for routine bilge defence.
