Network module delivering 10Gbps copper connectivity for SFP+ ports, suited to short copper runs and mixed-vendor setups. 10Gtek 10Gb SFP+ RJ45 Copper Module gives up to 30 metres CAT6a/CAT7 reach and broad vendor compatibility for rack and server-room upgrades. Will the listed compatibility and the PHY's thermal profile match an existing switch or NIC setup?
⚡ At a Glance
- • Data Rate: 10Gbps over SFP+ copper links, intended for 10G SFP+ ports
- • Best for: Network engineers upgrading rack switches and servers to 10GbE over copper
- • Not ideal for: Long-distance fibre links or switches listed as incompatible by the manufacturer
Provides 10Gbps connectivity over CAT6a/CAT7 copper with a 30m maximum reach. Marvell AQR113C PHY handles link negotiation and physical layer processing, with 2.5W power draw and thermal considerations.
Consistent 10Gb Performance - with Marvell AQR113C PHY
Marvell AQR113C manages physical-layer functions and link negotiation, supporting 10GBase-T over the SFP+ form factor. The PHY consumes around 2.5W under load, so thermal management matters during sustained transfers.
Stable high-throughput links suit server-to-switch connections and storage traffic, while awareness of heat output avoids unexpected thermal issues in dense racks.
Practical Copper Reach - thanks to CAT6a/CAT7 support
The transceiver accepts CAT6a or CAT7 RJ45 cabling and is rated for up to 30 metres of copper distance for 10GbE operation. Performance depends on cable quality and proper termination.
Short runs between racks, top-of-rack switches and adjacent cabinets gain 10GbE without fibre, simplifying cabling and reuse of existing copper infrastructure.
Wide Vendor Interoperability - with broad compatibility listings
Compatibility covers many vendors including Cisco, Meraki, Netgear, Mikrotik and several NAS brands, while certain vendors such as HP, Arista, Mellanox and others are explicitly unsupported. The manufacturer provides engineering support for additional compatibility checks.
Easier deployment across mixed environments when compatibility is confirmed, with a clear list of unsupported brands to avoid surprises.
✨ The 4 Key Reasons for 10Gtek 10Gb SFP+ RJ45 Copper Module
- Marvell AQR113C PHY - Stable performance under sustained 10Gbps throughput in rack environments
- 30m Copper Reach - Allows up to 30 metres with CAT6a or CAT7 cable
- Multi-vendor Compatibility - Works with Cisco, Netgear, Ubiquiti and many others
- SFP+ Form Factor - Fits standard SFP+ slots for easy hot-swap upgrades
📋 Technical Details at a Glance
- Category: 10GBase-T SFP+ RJ45 copper transceiver
- Data Rate: 10Gbps
- Connector Type: SFP+ cage, RJ45 on cable end
- Cable Type / Reach: CAT6a or CAT7, up to 30 metres
- PHY Controller: Marvell AQR113C
❓ Frequently Asked Questions
Q: Can the module run at full 10Gbps on any SFP+ slot?
A: Full 10Gbps operation requires a 10G-capable SFP+ port, as specified; the transceiver must be used in 10G SFP+ ports for proper operation.
Q: What cable should be used for maximum distance?
A: Use CAT6a or CAT7 RJ45 cable for the rated reach, with a maximum recommended distance of 30 metres for 10GbE links.
Q: Will it work with my switch brand?
A: Compatibility covers many major vendors such as Cisco, Netgear and Ubiquiti, but several brands are listed as incompatible; check the compatibility list or contact the manufacturer for confirmation.
🏆 Our Verdict
Ideal for network engineers and system administrators seeking to add 10GbE copper ports to compatible switches and NICs. The combination of a Marvell AQR113C PHY, 30-metre CAT6a/CAT7 reach and multi-vendor support makes it a practical copper upgrade path. Reasonable long-term value when used within the supported compatibility list, provided thermal conditions in racks are managed.
