Workshop dust-collection accessory that converts one 125mm hose into three usable outlets, helping keep benches tidy and machines connected. Saves time and reduces hose swapping when multiple tools need extraction. Is the Charnwood 125Y Dust Extractor Y Piece the simplest way to add extra connections without sacrificing airflow?
⚡ At a Glance
- • Suction Distribution: Directs airflow from a single 125mm inlet into three 125mm outlets, with higher airflow achieved when unused branches are closed
- • Best for: Workshops needing to connect several machines to one dust-extraction line
- • Not ideal for: Setups where two active branches both require full, uncompromised airflow simultaneously
Y-shaped splitter with three 125mm ends designed for use with 125FLEX hose. Hose clamps (125HC) are required to fasten hoses securely and closing unused branches increases airflow to the active outlet.
More Extraction Points – with a three-way 125mm Y splitter
Y-shaped configuration splits one 125mm hose line into three 125mm outlets, matching the diameter of standard 125FLEX hose. The layout keeps hose diameters consistent so flow characteristics remain predictable across branches.
Allow multiple machines to share a single extractor line without adapting to smaller hoses, making workshop layout changes quicker and tidier.
Secure Hose Connections – thanks to dedicated clamp requirement
Hose clamps labelled 125HC are specified to fasten the 125mm hoses to each outlet, ensuring a tight mechanical join at each connection point. Clamps prevent slippage under suction and reduce leakage at joins.
Provide reliable, leak-minimised joins that stay in place during heavy use, reducing the need for frequent re-securing or tape.
Easier Airflow Management – with the option to close unused branches
Closing off any branches not in use concentrates airflow down the active branch, improving suction at a single tool. The design relies on manual isolation rather than built-in valves, so physical closures are recommended.
Enable stronger extraction at the working station simply by capping spare outlets, offering a practical way to balance performance across a shared system.
✨ The 4 Key Reasons for Charnwood 125Y Dust Extractor Y Piece
- Three 125mm outlets – Allow connecting up to three tools with one extractor quickly
- Compatible with 125FLEX hose – Fits existing Charnwood 125mm hosework without awkward adapters
- Requires hose clamps (125HC) – Ensures a secure seal preventing leaks during heavy dust extraction tasks
- Close unused branches – Improves airflow concentration for a single active outlet when needed
📋 Technical Details at a Glance
- Brand: Charnwood
- Model: 125Y
- Category: Woodworking dust-extractor accessory
- Product ID: B06WP1ZXNL
- Outlet diameter: 125mm (5")
❓ Frequently Asked Questions
Q: What hose fits the 125Y Y piece?
A: The Y piece is designed for use with 125FLEX hose, matching the 125mm outlet diameter.
Q: Are hose clamps included for securing the hoses?
A: Hose clamps are required to fasten hoses securely and the specification references 125HC clamps; confirm inclusion with the seller before purchase.
Q: Can all three outlets be used at the same time?
A: All three outlets can be connected, but when multiple branches are active airflow will be shared; closing unused branches concentrates airflow to the active connection.
🏆 Our Verdict
Ideal for workshops that need to add extra extraction points without reworking existing ducting, perfect for shared extractor setups. The three 125mm outlets and compatibility with 125FLEX hose make adding connections straightforward while specified hose clamps ensure secure joins. A simple, practical accessory that delivers long-term value by reducing setup time and keeping workspaces cleaner.
