Plumbing replacement parts for bath and shower mixers that aim to stop drips and restore smooth handle action. Practical reassurance for DIYers and plumbers who want a straightforward swap. Will TML Bath Tap Cartridge Valve match older cartridges and seal correctly when measured?
⚡ At a Glance
- • Sealing Performance: Accurate 20-spline engagement with a 53mm body height for a secure mechanical fit
- • Best for: Homeowners and plumbers replacing bath or shower mixer cartridges
- • Not ideal for: Basin or sink taps that require a smaller 1/2" cartridge
Replacement cartridge specifies 20 splines and a 53mm height. Seating depth is 26mm, so confirm measurements before ordering.
Stops drips reliably, with 20-spline engagement
Twenty splines transfer torque evenly between the spindle and valve, restoring correct handle rotation and alignment. Precise spline geometry helps the internal seals seat evenly against the valve body.
Reliable closure reduces water waste and prevents the steady dripping that leads to higher bills and wasted hot water.
Easier installation, with supplied solid brass M4 screws and instructions
Solid brass M4 screws resist corrosion in wet environments and offer secure mounting compared with cheaper fixings. Supplied fitting instructions walk through the mounting sequence and basic checks.
DIYers and tradespeople save time and avoid extra trips for parts, making a single visit more likely to finish the repair.
Correct application for bath and shower mixers, with 26mm seating depth
Designed for 3/4" mixer valves that match a 26mm seating depth and 53mm overall height, so the seal sits at the correct depth within the tap body. Not suitable for smaller basin cartridges that use a 1/2" size.
Use where the old cartridge measures the same; choosing the matching seating depth is essential to achieve a watertight seal.
✨ The 4 Key Reasons for TML Bath Tap Cartridge Valve
- Solid Brass M4 Screws - Provides corrosion-resistant fixing for durable, low-maintenance installations over time
- Fitting Instructions Included - Cuts installation time and reduces risk of incorrect assembly
- Precise Fit - Restores smooth handle action, preventing loose or stiff rotation
- No Quibble Returns - Lets buyers exchange unused items confidently, reducing installation risk
📋 Technical Details at a Glance
- Category: Furniture / Plumbing replacement part
- Brand: TML
- Model: Bath Tap Cartridge Valve replacement
- Product ID: B07955GTJK
- Valve Size: 3/4"
❓ Frequently Asked Questions
Q: How do I know if this cartridge will fit my tap?
A: Measure the old cartridge, confirm a 53mm height and a 26mm seating depth, and check it has 20 splines; those dimensions must match to seal correctly.
Q: Can this be used in a basin or sink tap?
A: No, the cartridge is suitable for bath and shower mixer taps only, basin and sink taps commonly require a smaller 1/2" size.
Q: Are screws and instructions included for fitting?
A: Yes, solid brass M4 screws are supplied and fitting instructions are provided, and unused items are covered by a no quibble returns policy.
🏆 Our Verdict
Replacement valve suits homeowners and tradespeople who need a reliable swap for bath and shower mixers that match the listed dimensions. Precise 20-spline geometry, a 53mm height and supplied brass screws make for a secure, long-lasting repair. Replacement valve offers strong long-term value by stopping leaks and reducing future repair costs.
