Wireless accessory for sharing satellite TV signals across multiple receivers, designed to keep signal loss to a minimum. Reliable distribution makes life easier for households that want independent viewing across rooms. Is the Fenteer LNB Switch the right match for a small shared installation?
⚡ At a Glance
- • Signal Distribution: Splits two TV signals and routes them to four subscriber outputs with low loss
- • Best for: Homes, flats or small shared setups needing multiple receivers from one dish
- • Not ideal for: Installations requiring advanced multiswitch functions beyond voltage switching
Two TV signals are switched using receiver-supplied 13/18V and distributed to four subscribers. Professional circuit design and quality components aim to keep insertion loss low.
Share one satellite feed among multiple receivers - with 2-in 4-out switching
Switching selects between two incoming TV signals using 13/18V supplied from each receiver down the coax, routing the chosen input to the corresponding output. Four outputs accept the selected feed for simultaneous use without mutual interference.
Multiple household members can watch independently where receiver support exists. Four subscribers can use the feed at the same time without cross-talk.
Maintain signal quality over splits - with professional circuit design and low-loss components
High-quality components and a professionally designed circuit minimise insertion loss during splitting, preserving signal strength across outputs. The layout reduces attenuation that commonly affects cheaper splitters.
Cleaner picture and fewer dropouts after distribution, useful where signal margins are tight. Better long-term signal stability for shared installations.
Simple receiver-controlled switching - thanks to 13/18V voltage control via coax
Receivers send 13V or 18V down the coax to select the corresponding input port automatically, removing the need for manual switching. The switch routes the chosen LNB signal to the selected output according to the voltage present.
Independent receivers can choose the required input without extra switches or rewiring. Ideal for setups that rely on standard voltage-based LNB switching.
✨ The 4 Key Reasons for Fenteer LNB Switch
- High-quality components - Preserves signal strength across connections reliably
- Receiver-controlled switching - Allows automatic selection between two TV signals per receiver
- No mutual interference - Prevents cross-talk so viewers watch independently without distortion
- Standard 13/18V control - Compatible with receivers using voltage switching over coaxial cable
📋 Technical Details at a Glance
- Category: Wireless
- Type: 2x4 Splitter LNB switch
- Inputs: Two TV signals
- Outputs: Four subscriber outputs
- Voltage switching: 13/18V supplied by receiver through coaxial cable
❓ Frequently Asked Questions
Q: Can this unit distribute a satellite feed to several receivers?
A: Yes. The switch distributes signals into four subscribers so multiple receivers can use the feed simultaneously.
Q: How does switching between two TV signals work?
A: Switching is controlled by the 13/18V signal sent from each receiver down the coaxial cable, which selects the corresponding input port.
Q: Will multiple viewers interfere with one another when watching different channels?
A: No. The design allows simultaneous use without mutual interference, so viewers should be able to watch independently.
🏆 Our Verdict
Suitable for households, flats and small shared installations that need to share satellite TV across several receivers. Receiver-voltage switching plus low-loss circuitry lets independent receivers select and use two signals across four outputs without cross-talk. High-quality components and professional circuit design support reliable long-term performance for shared setups.
