Home improvement fixings designed to transfer heavy loads through plasterboard into the solid wall behind. Confidence when mounting TVs, radiators or shelving removes a lot of DIY anxiety. Could these fixings be the reliable answer for dot and dab walls with heavy items, COREFIX Plasterboard Wall Fixings?
⚡ At a Glance
- • Fixing Type: Steel-core dot and dab plug for plasterboard over blockwork
- • Best for: Wall-mounted TVs, radiators, shelving and heavy fixtures on dot and dab plasterboard
- • Not ideal for: Cantilever brackets and situations that require through-bolt anchors
Steel reinforcement transfers load from plasterboard to the solid wall behind. The four-fixings kit includes plugs, reinforced steel cores and zinc-plated screws for corrosion resistance.
Secure heavy mountings, with steel-core load transfer
A reinforced steel core locates inside the plastic plug and bears the load against the solid blockwork behind plasterboard. Load is channelled through the core rather than relying on compressed plasterboard alone.
Heavy items such as TVs and radiators are supported by the wall rather than by the plaster layer, reducing risk of crushing or pull-out.
Effective anchoring on dot and dab walls, with extended plug depth
Plugs measure 95mm to span the gap between plasterboard and blockwork, so the fixing fills the cavity before the steel core engages the solid material. Suitable for standard bricks, solid stone and aerated or lightweight blocks.
Fixtures mount securely even when plasterboard does not sit tight to the wall, making the kit practical for typical modern plasterboard installations.
Quicker, repeatable installs, with a simple 6-step system
The recommended sequence calls for a 10mm masonry drill to a depth of 120mm, clearing debris, tapping the plug and core into place, then fastening with the supplied screw. Only a drill, hammer and screwdriver are required.
Many DIYers will complete secure fixings fast, with fewer mistakes thanks to the straightforward, repeatable process.
✨ The 4 Key Reasons for COREFIX Plasterboard Wall Fixings
- Pack contents - Four plugs, four steel cores and four screws ready for immediate installation
- Long plug reach - 95mm plug depth spans cavity for reliable anchoring into blockwork
- Simple tool list - Only drill, hammer and screwdriver needed for each fixing
- Zinc-plated screws - Fasteners resist corrosion for long-term security and safety
📋 Technical Details at a Glance
- Category: Home Improvement
- Suitable Surfaces: Plasterboard over brick, solid stone and blockwork, including aerated blocks
- Load Capacity: Securely supports heavy items when mounted on four fixings as stated
- Plug Length: 95mm plastic plug length
- Steel Core Length: 45mm reinforced steel core
❓ Frequently Asked Questions
Q: Are these fixings suitable for mounting a TV?
A: Yes. The fixings are designed for plasterboard over blockwork and are stated to support heavy items such as wall-mounted TVs when used as a set of four fixings. They are not recommended for cantilever brackets.
Q: What tools and hole size are required for installation?
A: A drill, hammer and screwdriver are sufficient. Use a 10mm masonry drill bit and drill to a depth of 120mm before fitting the plug and core.
Q: Are the screws corrosion resistant for long-term use?
A: The supplied screws are zinc plated for corrosion resistance. No further information on other components' corrosion resistance is provided.
🏆 Our Verdict
The fixings suit homeowners and tradespeople who need to hang heavy items on plasterboard over blockwork with confidence. The steel-core design that transfers load into the wall behind is the key selling point for safer, long-term mounts. While final value depends on individual needs, durable materials and simple installation make the kit a sensible long-term investment.
