The Makita AN454 Roofing Nailer is a roofing tool designed to drive wire-collated coil nails quickly and consistently across roof surfaces. Adjustable firing modes and a 120-nail magazine reduce interruptions and help teams stay productive on long runs. Is it the right choice for everyday roofing work?
⚡ At a Glance
- • Nailing Performance: Consistent depth control when using wire-collated coil nails across common roofing materials
- • Best for: Roofing contractors and experienced DIYers fitting felt shingles and roofing membranes
- • Not ideal for: Users who need cordless operation or very fine finish carpentry
Contact trip and sequential shot firing modes suit both rapid and precise nailing. Operates with 19 to 45mm nails at 70 to 120 psi and holds 120 nails in the magazine.
Speedier installations - with a 120-nail magazine
A coil magazine accepts up to 120 wire-collated nails, reducing the frequency of reloads during long roofing runs. Pneumatic drive maintains cycle speed while the magazine feeds continuously.
Longer continuous runs mean fewer interruptions for reloading, so larger roof areas can be completed faster and with less fatigue for the crew.
Secure fastening - with 3.05mm gauge and 19–45mm nail range
The nail gauge of 3.05mm combined with an accepted length range from 19 to 45mm covers the most common roofing nail sizes. Wire-collated coils are designed to feed smoothly through the magazine for reliable placement.
Adaptable nail lengths allow correct penetration across felt, underlay and shingles, reducing the chance of underdriven or overdriven nails.
Flexible firing control - thanks to contact trip and sequential shot
Contact trip enables rapid successive firing by depressing the nose, while sequential shot requires the trigger to be released between nails for careful placement. Both modes are standard for pneumatic roofing nailers.
Rapid runs are possible when speed matters, or switch to controlled single shots when accuracy is required around edges and details.
✨ The 4 Key Reasons for Makita AN454 Roofing Nailer
- 120-nail magazine – Finish larger roof sections before needing to reload
- Contact trip and sequential firing – Switch between rapid runs and precise single nails
- Accepts 19–45mm nails – Handles a wide range of roofing material thicknesses reliably
- Wire-collated coil compatibility – Reliable feed for uninterrupted work on long roofs
📋 Technical Details at a Glance
- Category: Roofing Nailer
- Brand: Makita
- Model: AN454
- Nail type: Wire collated coil nails
- Nail length: 19 to 45mm
❓ Frequently Asked Questions
Q: What nail sizes does it accept?
A: Compatible nail sizes are 19 to 45mm with a 3.05mm gauge.
Q: Is it suitable for fixing felt shingles?
A: User feedback specifically cites quick and easy fixing of felt shingles, indicating good suitability for that task.
Q: What air pressure does it require?
A: Operating pressure range is 70 to 120 psi (4.9 to 8.2 bar).
🏆 Our Verdict
Suited to roofing contractors and experienced DIYers who need a reliable pneumatic nailer for regular roofing tasks. The combination of a large coil magazine, adaptable nail range and selectable firing modes makes on-site work faster and more controllable. Robust, work-focused specifications deliver long-term value for frequent roofing use.
