Handheld CCTV tester for on-site camera installation and fault finding, designed to diagnose multiple analogue and IP formats quickly. Saves time for installers and security technicians by combining power, network diagnostics and image display in one portable unit. Is it the right tool for everyday site work with long runtimes and built-in PoE? EVERSECU CCTV Tester
⚡ At a Glance
- • Camera Compatibility: Supports up to 8MP TVI, 4MP CVI, 5MP AHD, CVBS analogue cameras and H.265/H.264 IP cameras up to 4K, with PTZ control
- • Best for: Field installers and security technicians who need fast, multi-format testing and diagnostics
- • Not ideal for: Permanent site monitoring or full NVR management tasks
Handheld 4-inch touchscreen tester combines multi-format analogue and IP camera support with PoE output and network diagnostic tools. Battery-powered, portable design suits site installation and fault finding.
Rapid network camera discovery, with one-key IP detection and auto login
IP Camera test app includes IPC TEST, HIK test tool and DH test tool, plus an IP discovery function that detects network cameras and can auto display video after inputting username and password. One-key detection scans and lists camera IP addresses for quick connection.
Quickly locate and view network cameras on site without manual IP hunting, saving setup time during large installs and troubleshooting.
On-site powering and PoE testing, with DC12V 3A and PoE DC48V output up to 24W
Built-in DC12V 3A output and PoE DC48V output provide a maximum of 24W, while the tester supports 10/100/1000M Ethernet testing and shows network state and traffic. PING, port flashing and IP address scan functions assist network checks.
Power cameras directly from the tester for quick verification and PoE checks, removing the need to carry separate power supplies during installations.
Portable site-ready operation, with 4-inch touch screen and long runtime
4-inch 800x480 touch screen sits in a wrist-style, portable body and runs from a 7.4V 2400mAh lithium polymer battery. Typical charging takes 4 to 5 hours and working time lasts around 8 hours per charge.
Comfortable to carry and capable of a full day’s work without frequent recharging, ideal for technicians who move between sites.
✨ The 4 Key Reasons for EVERSECU CCTV Tester
- PoE DC48V, 24W output - Powers most PoE cameras directly for immediate testing
- One-key IP discovery and auto display - Cuts setup time when locating network cameras
- 4-inch touchscreen, wrist design - Easy to use single-handed on ladders and in tight spaces
- Built-in network diagnostics - PING, port scan and traffic readouts help isolate network faults quickly
📋 Technical Details at a Glance
- Display: 4-inch touchscreen
- Screen resolution: 800 x 480
- Supported formats: TVI up to 8MP, CVI up to 4MP, AHD up to 5MP, CVBS analogue
- IP camera support: H.265 and H.264 up to 4K
- Power output: DC 12V, 3A
❓ Frequently Asked Questions
Q: Which camera types can be tested with the unit?
A: Supports TVI up to 8MP, CVI up to 4MP, AHD up to 5MP, CVBS analogue and H.265/H.264 IP cameras up to 4K, and includes PTZ control.
Q: Can the tester power cameras on site?
A: Yes, the tester provides DC12V 3A output and PoE DC48V output with a maximum power of 24W for powering and testing cameras.
Q: How long does the battery last and how quickly does it charge?
A: The 7.4V 2400mAh battery typically delivers around 8 hours of working time after a 4 to 5 hour charge.
🏆 Our Verdict
Ideal for installers and security technicians who need a compact, all-in-one testing tool for analogue and IP cameras. The combination of multi-format support, PoE out and built-in network diagnostics makes it particularly useful for on-site commissioning and fault finding. While more feature-rich than basic testers, the practical functionality and portability deliver strong long-term value for professional use.
