Coilovers for BMW 3 Series, designed to lower ride height and sharpen handling for E90 to E93 cars. maXpeedingrods Coilovers for BMW 3 Series bring a firmer, more connected driving feel that appeals to enthusiastic owners. Are the fitment exclusions and lack of top mounts an acceptable compromise for most owners?
⚡ At a Glance
- • Ride Adjustability: Adjustable lowering 0 to 60mm, front spring rate 5kg/mm, rear spring rate 9.5kg/mm
- • Best for: Enthusiasts who want a lowered stance and adjustable handling on BMW E90 to E93 2WD cars
- • Not ideal for: Owners of BMW 325i E92 coupe, E93 330d, 320d, 318d, M3 variants, or all-wheel-drive vehicles
Adjustable coilover set for BMW 3 Series E90 to E93, offering 0 to 60mm lowering and specified spring rates. Kit includes two front and two rear shocks, springs, two C-spanners, front bump stops and dust covers, with no top mounts supplied.
Sharper handling and lower centre of gravity, with adjustable height 0 to 60mm
Adjustable height is specified as a 0 to 60mm lowering range, allowing static ride height to be altered within that span. Quoted spring rates indicate intended firmness, which combines with lowered stance to change dynamic balance.
Owners can set ride height for track or road use, improving cornering composure and giving a more purposeful stance.
Tuned front-to-rear balance, with 5kg/mm front and 9.5kg/mm rear springs
Front springs are rated 5kg per millimetre, rear springs 9.5kg per millimetre, providing a stiffer rear bias. The differing rates are a basic way to control pitch and load transfer between axle ends.
A firmer rear helps resist squat under acceleration while the softer front promotes sharper turn-in, aiding predictable handling for enthusiastic drivers.
Basic installation kit included, with shocks, springs, C-spanners and bump stops
Supplied quantities include two front and two rear shocks, two front and two rear springs, two C-spanners, plus front bump stops and dust covers. No top mounts are supplied, and modification is required if using OE top mounts.
Most consumables for a retrofit are provided, reducing the need to source extra parts, but plan for additional work or parts if original top mounts must be retained.
✨ The 4 Key Reasons for maXpeedingrods Coilovers for BMW 3 Series
- Fitment Coverage - Suits many E90 to E93 chassis from 2005 to 2013
- Complete Basic Hardware - Includes shocks, springs, C-spanners, bump stops, dust covers for immediate installation
- No Top Mounts Supplied - Expect modification if you intend to use OE top mounts
- Explicit Exclusions Listed - Not compatible with several coupe, diesel and AWD models
📋 Technical Details at a Glance
- Category: Automotive suspension, coilover lowering kit
- Brand: maXpeedingrods
- Applicable Models: BMW 3 Series E90, E91, E92, E93 (2005 to 2013)
- Drive Type: 2WD only
- Adjustable Height: Lowering range 0 to 60mm
❓ Frequently Asked Questions
Q: Will these coilovers fit my BMW 3 Series?
A: They are listed for BMW 3 Series E90, E91, E92 and E93 models from 2005 to 2013, specifically for 2WD variants. Several specific models are excluded, so check the exclusions before ordering.
Q: Are top mounts included with the kit?
A: No top mounts are included, and modification is required if original equipment top mounts are to be used. Plan for additional parts or workshop work if OE top mounts must be retained.
Q: What is included in the kit?
A: The kit includes two front and two rear shocks, two front and two rear springs, two C-spanners for adjustment, front bump stops and dust covers. No top mounts are supplied.
🏆 Our Verdict
Suitable for BMW 3 Series E90 to E93 owners who want adjustable lowering and sharper handling on 2WD cars. Adjustable 0 to 60mm lowering combined with defined front and rear spring rates and basic installation hardware makes the set practical for enthusiasts willing to accept fitment caveats. Consider workshop time and potential top mount modifications against the long-term handling improvements.
