Uxcell Refrigerator Thermal Overload Protector is a kitchen repair part aimed at preventing compressor overheating by replacing a worn or faulty protector in domestic refrigerators. Peace of mind for DIYers and technicians who need a straightforward swap to get a fridge running again. Is the protector the correct match for your compressor and voltage?
⚡ At a Glance
- • Protection Performance: Rated for 1/6HP, 125W compressor use with thermal cut-out action
- • Best for: Home repairers and appliance technicians replacing compressor protectors
- • Not ideal for: Compressors that do not match the specified power and voltage requirements
Thermal overload protector specified at 1/6HP (125W) for compressor protection. Intended for 220V systems with a note on 110V compatibility for lower-power compressors.
Reliable compressor protection, thanks to the 1/6HP (125W) rating
Bimetallic thermal cut-out responds to excessive temperature and current draw, opening the circuit to prevent motor overheating. The protector is built to match compressor power ratings so the trip point aligns with expected operating conditions.
Direct replacement helps prevent motor burnout and repeated starts that stress the compressor. Suitable for repairs where matching the protector rating to compressor power is essential.
Clear voltage guidance, with explicit 220V and 110V distinctions
Label guidance specifies that the protector suits 1/6HP compressors at 220V, while the same type is appropriate for 1/8HP compressors at 110V. Selection depends on matching both the voltage and the compressor horsepower.
Choosing a protector using the stated voltage and horsepower reduces the risk of mismatched protection. Ensures replacements are appropriate for either 220V or 110V systems when the correct horsepower is chosen.
Simplified fault diagnosis, thanks to the product breakdown judgement note
The protector may exhibit a shaking sound and a non-fixed bimetallic sheet when faulty, providing an audible and physical cue. Such behavioural signs help identify whether the protector is operating normally or needs replacement.
Quick identification of a failing protector speeds up repairs and prevents unnecessary component swaps. Useful for technicians who want a simple on-site check before fitting a replacement.
✨ The 4 Key Reasons for Uxcell Refrigerator Thermal Overload Protector
- Straight swap-in fit, Reduces repair time by matching common protector sizes
- Clear voltage guidance, Helps avoid incorrect replacements between 220V and 110V
- Audible fault cue, Shaking sound helps diagnose faulty protectors quickly at once
- Repair-focused use, Works for refrigerators and similar electric protection appliances
📋 Technical Details at a Glance
- Category: Refrigerator thermal overload protector
- Power Rating: 125W
- Horsepower: 1/6HP
- Voltage Compatibility: 220V recommended for 1/6HP, 110V suitable for 1/8HP
- Intended Use: Compressor replacement / repair
❓ Frequently Asked Questions
Q: How do I know if this protector fits my compressor?
A: Check the compressor power rating and size; the protector is specified for 1/6HP (125W) compressors, so the protector power must meet or exceed the compressor power.
Q: Can the protector be used on 110V systems?
A: Guidance indicates 110V systems should use the protector with a 1/8HP compressor; ensure both voltage and horsepower match before selecting a protector.
Q: How can I tell if a protector has failed?
A: A normal failure sign is shaking with sound and a non-fixed bimetallic sheet, which indicates the protector may no longer be functioning correctly.
🏆 Our Verdict
Suitable for DIYers and appliance technicians who need a direct replacement protector for domestic compressor repairs. The clear horsepower and voltage guidance, plus audible fault cues, make it practical for straightforward diagnosis and swap-outs. A pragmatic choice for prolonging compressor life and avoiding repeated faults, offering solid long-term value for repair work.
