Epoxy resin for clear casting and laminating with predictable mixing and good pigment compatibility: Dipoxy Epoxy Resin 2K-700. Hobbyists and small-scale makers benefit from a low-viscosity, crystal-clear finish that reaches intricate moulds. Is this the right resin for larger pours or time-sensitive repairs?
⚡ At a Glance
- • Finish Quality: Crystal clear, low-viscosity finish that accepts pigments well
- • Best for: Woodworkers, jewellery makers and model makers needing clear casts
- • Not ideal for: Projects that require extremely rapid cure cycles or industrial heat curing
Two-component, solvent-free epoxy mixed 2:1 by weight for laminating and clear casting. Self-venting behaviour and recommended mixing speeds help reduce trapped air.
Highly transparent casts - thanks to low-viscosity, crystal-clear formulation
Low viscosity allows air to escape more easily during mixing and pouring while the resin chemistry cures to a clear, hard finish. Self-venting behaviour further helps reduce bubble entrapment when mixed and poured correctly.
Crystal-clear results suit river tables, jewellery and display pieces where transparency matters. Compatible with pigments for vivid colours without clouding.
Predictable curing and straightforward mixing - with a 2:1 weight ratio and stirring guidance
Two components are mixed at a 2:1 ratio by mass and should be combined at 10 - 20 °C. Recommended stirring at 250 - 350 rpm for about 4 - 5 minutes ensures even dispersion and complete reaction.
Consistent mixing reduces variability between batches and supports reliable curing. User feedback reports touch-dry surfaces within hours under suitable conditions.
Wide application range - with a solvent-free formula suitable for many substrates
Formulation is described as solvent-free and suitable for use with silicone moulds, carbon, aramid and fibreglass joints, as well as direct applications like pond, aquarium and boat work.
Versatility makes the resin useful for model making, floors, river tables, aquariums and composite repairs. Good adhesion and compatibility encourage mixed-media projects.
✨ The 4 Key Reasons for Dipoxy Epoxy Resin 2K-700
- Fast touch-dry cure - Suitable for small pours and quick finishing steps
- Bubble-free mixing - Reaches intricate moulds and reduces trapped air effectively
- Good pigment compatibility - Keeps colours vivid with stable, clear finishes over time
- Versatile application range - Suitable for river tables, aquariums and model making
📋 Technical Details at a Glance
- Category: Epoxy resin, two-component (2K)
- Brand: Dipoxy
- Model: 2K-700
- Pack size: 6.0 kg
- Mixing ratio: 2:1 (by weight)
❓ Frequently Asked Questions
Q: What is the correct mixing ratio for Dipoxy-2K-700?
A: Mix components at a 2:1 ratio by mass, for example 100 g of part A to 50 g of part B. Mix at 10 - 20 °C and stir at about 250 - 350 rpm for approximately 4 - 5 minutes until fully combined.
Q: Can this resin be used for aquariums and ponds?
A: Aquarium and pond construction are listed among suitable uses in the product description, indicating compatibility for such applications when cured correctly.
Q: How can bubble formation be minimised?
A: Low-viscosity, self-venting chemistry helps reduce bubbles and user reviews note bubble-free mixing into intricate moulds; following the recommended stirring speed and time improves results.
🏆 Our Verdict
Dipoxy Epoxy Resin 2K-700 suits hobbyists and small-scale makers working on river tables, jewellery and model projects. The combination of low-viscosity, crystal-clear finish and a straightforward 2:1 mixing routine delivers predictable, pigment-friendly casts. Reliable curing behaviour and broad compatibility make for a practical long-term choice for creators needing consistent, clear results.
