Small electrical component for panel and appliance control, designed to deliver dependable on/off switching for DIY and repair tasks. Uxcell Rocker Switch has clear position markings and a compact snap-in bezel that speeds installation, but does it meet the demands of marine and vehicle circuits?
⚡ At a Glance
- • Switch Action: Latching ON/OFF action, two-position clarity
- • Best for: Panel-mounted on/off control for DIY and repair tasks
- • Not ideal for: Circuits requiring illuminated indicators or multi-way switching
Compact SPST rocker switch with latching action for secure on/off positions. Simple snap-in bezel suits standard panel cut-outs.
Dependable heavy-load switching - thanks to AC 250V/15A rating
Rated for AC 250V/15A and 125V/20A, the SPST arrangement channels a single live conductor and uses a latching mechanism to hold the selected state. Terminals are designed for direct soldering or connector attachment.
Handles higher-current circuits found in domestic appliances and small motors when installed within its rating. Reliable contact performance reduces the chance of accidental trips in everyday use.
Fast panel replacements - with snap-in mounting and compact dimensions
Mounting size measures 28 x 10.5 mm and overall dimensions are 33 x 14 x 38 mm, allowing the bezel to be pressed into a matching cut-out for a secure fit. Parallel insertion and equal pressure to bezel sides ensure correct seating.
Makes swaps and upgrades straightforward, especially in cramped dashboards or control panels. No additional fasteners required, so installation time is reduced.
Clear wiring and operation - with two terminals and I - O markings
Two terminals simplify wiring, while 'I - O' markings identify ON and OFF positions for quick visual confirmation. Soldering guidance recommends a 20W iron, keeping joint time short to protect the switch.
Reduces wiring errors during DIY repairs and speeds up assembly for batch installs. Following the recommended soldering approach helps produce consistent, reliable connections.
✨ The 4 Key Reasons for Uxcell Rocker Switch
- Wide compatibility - Works with boats, trucks, panels and many household appliances
- High current rating - Handles AC 250V/15A and 125V/20A for robust circuits
- DIY-friendly soldering - Recommended 20W iron, quick solder joints for reliable connections
- Good value - User feedback highlights affordability and suitability for budget repairs
📋 Technical Details at a Glance
- Brand: Uxcell
- Product ID: B07TD9J9CS
- Category: Rocker switch
- Switch type: SPST
- Terminals: 2
❓ Frequently Asked Questions
Q: What electrical ratings does the switch support?
A: Rated for AC 250V at 15A and 125V at 20A, with an SPST configuration for single-circuit on/off control.
Q: Does the switch include an indicator light?
A: No, the listing specifies that no light is included.
Q: How should the switch be mounted and soldered?
A: Drill or cut a 28 x 10.5 mm hole for the snap-in bezel and insert parallel to the panel, applying equal pressure to the bezel sides. Use a 20W soldering iron and complete solder joints quickly, around three seconds, to protect the switch pins.
🏆 Our Verdict
Suitable for DIYers, vehicle and marine repairers who need a compact, panel-mounted on/off control. The clear I - O markings, latching action and straightforward soldering guidance make it a practical replacement option. Cost-conscious buyers seeking a simple, durable switch will find long-term value in its broad compatibility and robust current rating.
