A metal-cutting chop saw designed for accurate, clean cold cuts with minimal sparks. Enjoy faster workflow and ready-to-weld edges that save time and reduce finishing. Is the Evolution Power Tools S355CPS Chop Saw the right choice for regular mild steel work?
⚡ At a Glance
- • Cutting Quality: Cold, burr-free cuts on mild steel using a 66-tooth TCT blade for an instantly workable finish
- • Best for: Tradespeople and home fabricators who need accurate cuts in box section, angle iron, pipe and plate
- • Not ideal for: Users who need a multipurpose saw for timber, masonry or applications requiring high heat cutting
A 2,200W motor and a 66-tooth mild steel TCT blade produce fast, cold cuts with very low sparking. A 0-45 degree mitre vise enables repeatable angled cuts.
Faster Metal Cutting – With a 2,200W motor
A high-power, 2,200W motor drives the 355mm blade at a speed suited to cutting mild steel quickly while maintaining control. Motor torque reduces dwell time on each cut, so fewer passes are needed for thicker sections.
Reduced cutting time keeps jobs moving and lowers operator fatigue. Ideal when multiple lengths or repetitive cuts are required on-site or in a workshop.
Accurate Angle Cuts – Thanks to a 0–45 degree mitre vise with detents
A durable vise clamps workpieces securely and includes mitre detents plus a locking pin to hold common angles. The V-block accessory helps support round and irregular sections for straighter cuts.
Consistent mitre angles make fabrication and assembly simpler, removing the need for secondary angle checks. Useful for making frames, brackets and precise weld-ready joints.
Clean, Ready-to-Weld Edges – With a 66-tooth mild steel TCT blade
A tungsten carbide tipped (TCT) blade with 66 teeth is optimised for cold cutting mild steel, producing minimal burrs and little heat. The cold-cutting action reduces oxidation and leaves an instantly workable edge.
Saves time on grinding and finishing after cutting, so metal parts can be primed or welded sooner. Particularly helpful for stainless or coated steels where heat marks are a concern.
✨ The 4 Key Reasons for Evolution Power Tools S355CPS Chop Saw
- 2,200W motor – Cuts through mild steel much faster, reducing cycle time
- 66-tooth TCT blade – Leaves smooth, burr-free edges ready for welding
- 0–45° mitre capability – Delivers repeatable angled cuts for accurate assemblies
- 3 year warranty – Offers long-term confidence in durability and support
📋 Technical Details at a Glance
- Category: Metal-cutting chop saw
- Motor Power: 2,200W
- Blade Diameter: 355mm
- Blade Type: Tungsten carbide tipped (TCT), mild steel blade
- Blade Teeth: 66
❓ Frequently Asked Questions
Q: Can the saw cut mild steel and structural sections?
A: Yes, designed specifically for mild steel, the saw handles box section, angle iron, pipe and plate with accurate results.
Q: Is a blade included and what type is it?
A: A 66-tooth mild steel TCT (tungsten carbide tipped) blade is supplied for clean, cold cutting with minimal burrs.
Q: Does the saw make sparks or heat the metal significantly?
A: Cold-cutting action produces virtually no sparks and little heat, resulting in an instantly workable finish.
🏆 Our Verdict
Well suited for metalworkers, fabricators and ambitious DIYers who need reliable, repeatable cuts in mild steel. Fast cutting power combined with a TCT blade and mitre vise delivers ready-to-weld edges and accurate angles. While representing a clear workshop investment, durable build quality, included accessories and a three-year warranty support strong long-term value.
