A Home Improvement solution that boosts household water pressure for showers, taps and tanks, the EVERGD Booster Pump combines automatic and manual operation. Stronger, more reliable flow removes the frustration of low-pressure mornings and slow-filling tanks. Will the 220V/50Hz requirement and your installation points match what you need?
⚡ At a Glance
- • Boosting Power: Delivers up to 18 litres per minute with a maximum 10 metre head, driven by a 90W motor at 2860 rpm
- • Best for: Homes with insufficient mains pressure, shower rooms, washing machines and garden taps
- • Not ideal for: Properties without compatible 220V/50Hz supply or applications needing submersible pumping
Automatic switch enables manual or autonomous operation to respond to water demand. Construction uses copper winding, a stainless steel body and brass impeller for durability.
Stronger showers and quicker fills - thanks to a 90W motor and 18 litres per minute capacity
A 90W motor spins at around 2860 rpm to move up to 18 litres of water per minute against a 10 metre head. That combination raises flow and pressure across household outlets.
Noticeably firmer tap and shower flow and shorter times to fill tanks or containers, useful for busy mornings and garden chores.
Hands-free operation for daily use - with an automatic on/off switch for demand response
An automatic switch allows autonomous mode, starting the pump when flow is detected, or manual mode for continuous running when required. Manual mode suits intermittent tasks like pond filling or garden hoses.
Showers and appliances receive pressure when needed without manual switching, while manual mode gives full control for occasional high-flow tasks.
Durable build for damp locations - with copper winding, stainless steel body and brass impeller
Key components use corrosion-resistant materials: copper winding for the motor, a stainless steel casing and a brass impeller that tolerate wet environments and frequent starts.
Suitable for mounting near tanks, wells and pools, offering longer reliable service life in typical domestic water installations.
✨ The 4 Key Reasons for EVERGD Booster Pump
- Automatic switch - Starts and stops with water demand for hands-free shower control
- Copper winding - Resists overheating for steady performance during long runs
- Stainless steel body - Corrosion-resistant casing suitable for outdoor and damp locations
- Simple installation - Straightforward setup, compatible with standard 220V household wiring
📋 Technical Details at a Glance
- Power: 90W max
- Voltage: 220V
- Frequency: 50Hz
- Flow rate: 18 litres per minute
- Maximum head: 10 metres
❓ Frequently Asked Questions
Q: Can this boost the pressure in a typical shower?
A: Suitable for shower rooms, the unit is designed to raise pressure with up to 18 litres per minute flow and a 10-metre head, provided a 220V/50Hz supply is available.
Q: Is installation difficult?
A: User feedback describes a simple, straightforward installation, and the booster can be fitted to tanks, wells, pools and standard household plumbing points.
Q: What materials are used in the build?
A: Key components use copper wire for the motor, a stainless steel body for the casing and a brass impeller for corrosion resistance.
🏆 Our Verdict
The EVERGD Booster Pump suits households and gardens struggling with weak mains pressure, particularly where showers and appliances need a reliable flow. Robust materials plus an automatic/manual switch make it practical for regular domestic use and varied installation points. While the 220V/50Hz electrical requirement must match your supply, the combination of performance and durable construction offers solid long-term value.
