Home-improvement wall fixings promise straightforward, secure mounting of flat-screen TVs on plasterboard over blockwork. Enjoy peace of mind when fitting heavier sets by transferring load back to the solid backing behind the plasterboard. Is COREFIX TV Wall Fixings the right choice for dot-and-dab or insulated walls?
⚡ At a Glance
- • Holding Capacity: Up to 150kg across six reinforced steel-core fixings, load transferred to solid backing
- • Best for: Mounting flat-screen TVs on plasterboard over brick, solid stone or blockwork, including aerated/lightweight blocks
- • Not ideal for: Cantilever brackets are not recommended
Designed for dot-and-dab plasterboard over solid masonry, the kit includes plugs, steel cores and screws plus a 10mm drill bit. Patented steel-core reinforcement prevents plasterboard crushing by transferring load to the wall behind.
Strong load support - with reinforced steel core
A patented steel core sits inside the plastic plug and transfers tensile and shear forces into the solid wall behind plasterboard, preventing the plasterboard from bearing the full load. Zinc-plated screws engage the core to lock the assembly in place.
Secure mounting capable of supporting up to 150kg across six fixings, giving confidence for larger TVs and heavier brackets.
Straightforward installation - with included 10mm drill bit and six-step design
A 10mm masonry drill bit is supplied for the required 100mm hole depth; the process calls for drilling, clearing dust, tapping the plug and core into place and fastening with the supplied screw. The sequence needs only a drill, screwdriver and hammer.
Quick, no-fuss fit for competent DIYers and tradespeople, reducing trips to the tool store and simplifying the installation process.
Works on insulated and lightweight masonry - thanks to deep plug profile
Plug length is sufficient to bridge the gap between plasterboard and the solid backing, allowing the steel core to bear the load on brick, stone or blockwork including aerated blocks. The design prevents crushing of the plasterboard layer by relocating forces to the solid substrate.
Suitable for dot-and-dab and insulated walls where finding timber studs is impractical, enabling secure TV mounting without major wall alterations.
✨ The 4 Key Reasons for COREFIX TV Wall Fixings
- Included 10mm drill bit - Speeds installation by avoiding an extra trip for tools
- Zinc-plated steel screws - Corrosion-resistant fasteners for long-lasting anchoring
- Patented steel core - Transfers load to solid masonry, preventing plasterboard failure
- Designed for dot-and-dab walls - Avoids chasing studs when mounting TVs on insulated walls
📋 Technical Details at a Glance
- Category: Home Improvement
- Brand: COREFIX
- Pack contents: 6 plugs, 6 reinforced steel cores, 6 screws, 10mm drill bit
- Plug length: 95mm plastic plug length
- Core length: 45mm reinforced steel core
❓ Frequently Asked Questions
Q: Can these fixings hold a heavy television?
A: Yes. The pack of six reinforced steel-core fixings can securely withstand up to 150kg when installed correctly, with load transferred to the solid wall behind the plasterboard.
Q: Are these suitable for dot-and-dab or insulated plasterboard walls?
A: Yes. The plug depth is designed to bridge the gap between plasterboard and the solid backing, and the fixings are suitable for brick, solid stone and blockwork including aerated/lightweight blocks.
Q: Does the kit include everything needed to drill and fit the fixings?
A: Yes. The pack contains six plugs, six 45mm reinforced steel cores, six 100mm zinc-plated screws and a 10mm masonry drill bit for the required 100mm hole depth.
🏆 Our Verdict
DIYers and tradespeople fitting flat-screen TVs to plasterboard over brick or block backing will find the fixings practical and reliable. Patented steel-core reinforcement that transfers load to the solid wall behind plasterboard is the key advantage for heavy sets. Durable components and the included drill bit make the pack a sensible long-term choice for dependable installations.
