Handheld CCTV testing monitor that combines analogue, HD coax and IP camera diagnostics for on-site commissioning. Installers gain faster fault-finding and greater confidence to finish jobs on the first visit. Is the POMIACAM CCTV Tester Monitor the practical multitool suited to everyday site work?
⚡ At a Glance
- • Image Quality: Support for 8MP AHD/TVI/CVI and 4K IP display, 1920×1080 IPS touchscreen, 4x zoom, record and playback
- • Best for: Installers and security technicians needing on-site commissioning, activation and diagnostics
- • Not ideal for: Users who require a full-time large-format monitoring solution
Handheld tester supports AHD, TVI, CVI, SDI, CVBS and 4K IP camera formats. Includes HDMI and VGA inputs, DC12V/3A output, PoE control, cable testing and built-in Wi-Fi.
Power and Live Feed from One Lead - with DC12V/3A output and PoE control
DC12V/3A output supplies local analogue cameras while PoE control can enable power over Ethernet for network cameras, allowing live video and coaxial PTZ control over the same connection.
Power cameras on-site without separate power bricks, simplifying installation and troubleshooting and reducing kit to carry.
Faster Network Commissioning - with IPC Test Pro and batch HIK/DH tools
Auto-scan discovers network cameras across segments, and batch activation supports HIK and Dahua models with options to modify IP addresses, usernames and passwords.
Bulk activation and quick configuration speed up site setup, cutting time spent at each location.
Accurate Cable Fault Finding - with RJ45 TDR testing and cable tracer
TDR measurements report pair status, length, attenuation, reflectivity and impedance, while the tracer identifies near-end, mid-end and far-end fault points and saves testing reports.
Pinpoint faulty runs and verify cable integrity before camera installation, avoiding repeat visits and unreliable connections.
✨ The 4 Key Reasons for POMIACAM CCTV Tester Monitor
- DC12V/3A Power Output - Power cameras directly during installation, no separate adapter needed
- PoE Control - Enable network cameras and supply power via Ethernet reliably
- RJ45 TDR Cable Test - Locate faults and measure cable length and pair integrity
- Built-in Wi-Fi and App - View wireless cameras and create a hotspot for testing
📋 Technical Details at a Glance
- Display: 5-inch IPS touchscreen, 1920×1080 resolution
- Supported Video Formats: H.265, H.264
- Video Inputs: HDMI in, VGA in
- Supported Camera Types: AHD, TVI, CVI, EX-SDI, SDI, CVBS and 4K IP cameras
- Resolution Support: 3840 × 2160P support for 8MP testing
❓ Frequently Asked Questions
Q: Can the tester power cameras on-site?
A: Yes. A DC12V/3A output can power analogue cameras and the tester can open PoE power for network cameras.
Q: Which camera types are supported?
A: Supports analogue CVBS plus HD coax formats (AHD, TVI, CVI, EX-SDI/SDI) and 4K-capable IP cameras.
Q: Can network cameras be batch activated or configured?
A: Yes. IPC Test Pro includes auto-scan and batch activation for HIK and Dahua cameras, with options to modify IP address and login credentials.
🏆 Our Verdict
Ideal for installers and CCTV technicians who need a single handheld tool for testing, powering and configuring cameras. The combination of multi-format video support, DC12V/3A and PoE power, network activation tools and cable diagnostics makes on-site commissioning much quicker. While the initial outlay may be higher than a simple tester, integrated features cut long-term costs by reducing repeat visits.
