Marine bilge and ventilation blower promising powerful, reliable airflow for engine bays and cabins. Terisass Marine Bilge Air Blower brings reassurance to boat owners who need consistent circulation and corrosion-resistant construction. Is the combination of airflow, efficiency and build quality right for your vessel?
⚡ At a Glance
- • Airflow Capacity: High-flow 128 C rated at 3,800 litres per minute with 75 mm hose connections
- • Best for: Yacht and boat owners needing ventilation for engine compartments, galley areas and bilges
- • Not ideal for: Continuous heavy-duty operation, as unit is intended for intermittent use only
High-flow 3,800 litres per minute output pairs with 75 mm (3-inch) hose connections and an ABS housing suitable for marine environments. Low 2.5 A current draw and claimed 25% higher efficiency than traditional linear blowers reduce battery load.
Improved air circulation – thanks to high-flow 3,800 litres per minute capacity
High-flow rating of 128 C corresponds to roughly 3,800 litres per minute and uses hose connections at both ends for 75 mm (3-inch) blower hoses. The in-line arrangement moves large volumes of air through tight spaces such as engine compartments and bilges.
Faster exchange of stale or hot air in engine bays and cabins, reducing heat buildup and helping to clear fumes or moisture quickly.
Low electrical load – with 2.5 A current consumption and 25% higher efficiency
Measured current draw is 2.5 A, and the motor design claims around 25% greater efficiency versus traditional linear blowers, lowering overall power demand. Suitable for typical 12 V marine electrical systems.
Reduced battery drain during intermittent runs, keeping auxiliary power available and making integration with existing boat electrics straightforward.
Marine-grade durability – with ABS construction and waterproof motor shell
High-quality ABS thermoplastic body includes moulded mounting brackets and an anti-corrosion design, while the motor is enclosed in a waterproof shell to resist marine conditions.
Reliable performance in salty, humid environments and less maintenance from corrosion, making the unit suitable for on-board installation where exposure is likely.
✨ The 4 Key Reasons for Terisass Marine Bilge Air Blower
- 75 mm Hose Compatibility – Fits standard 3-inch blower hoses for simple connection
- Low 2.5 A Draw – Minimises battery drain during intermittent ventilation
- Vertical or Horizontal Mounting – Flexible installation in tight or awkward spaces
- Waterproof Motor Shell – Enhanced resistance to moisture and corrosion
📋 Technical Details at a Glance
- Category: Lawn & Patio
- Brand: Terisass
- Model: In-Line Air Blower (Marine Bilge)
- Product ID: B088YJDWNM
- Flow rate: High flow 128 C (approximately 3,800 litres per minute)
❓ Frequently Asked Questions
Q: What hose size is required for the blower?
A: Both ends accept blower hoses with a diameter of 75 mm (3 inches), allowing direct connection to standard 3-inch ducting.
Q: Can the blower be used continuously?
A: No, the unit is intended for intermittent use only; continuous heavy-duty operation is not recommended.
Q: Is the blower suitable for marine environments?
A: Yes, ABS construction with an anti-corrosion design and a waterproof motor shell make the blower suitable for marine applications such as engine compartments and bilges.
🏆 Our Verdict
Ideal for yacht and boat owners who need intermittent ventilation in engine bays, galleys and bilges. High-flow performance, low 2.5 A draw and corrosion-resistant ABS construction combine to deliver durable, efficient ventilation. Practical long-term value comes from reduced power consumption and materials designed for marine exposure.
