Boat-launch accessory designed to keep trolleys rolling on soft sand and shingle. AB Tools Launch Trolley Wheel reduces strain during launches and recoveries, making outings less fraught for solo sailors and small-boat crews. Will axle diameter and clearance match your existing trolley setup?
⚡ At a Glance
- • Load Handling: Non-sink flat tyre spreads load to maintain movement on soft surfaces
- • Best for: Sailors and small-boat owners who frequently launch on sand or shingle
- • Not ideal for: Users who need pneumatic tyres for road towing or hard-surface towing
14-1/2" (370mm) launch trolley wheel with a 1 inch (25.4mm) centre bore. Puncture-proof cellular foam construction and requires 73mm of axle to pass through the centre.
Easier launches – thanks to the 370mm non-sink flat tyre
A 14-1/2" (370mm) diameter and flat tyre profile increase contact area with soft ground, reducing pressure per square centimetre. The wider footprint helps the wheel roll rather than dig into sand or shingle.
Reduced effort when moving a dinghy across soft beaches, meaning fewer stops and less back strain during launches and recoveries.
Low maintenance – with puncture-proof cellular foam tyre
Cellular foam construction eliminates the need for inner tubes and resists sharp objects that commonly puncture pneumatic tyres. The foam remains serviceable without inflating or repairing tubes.
No pump or repair kit required after minor contact with debris, so trolleys stay ready to use and downtime is minimised.
Straightforward fitting – with a 1 inch (25.4mm) centre bore
A 1 inch (25.4mm) centre bore accepts standard 1-inch axles and the design requires 73mm of axle to pass fully through the wheel centre for secure mounting. Exact axle clearance ensures the wheel sits correctly on the trolley spindle.
Quick replacement or upgrade for trolleys using standard axles, provided the axle length meets the 73mm requirement.
✨ The 4 Key Reasons for AB Tools Launch Trolley Wheel
- 370mm diameter – Easier rolling over sand and shallow shingle, reducing launch effort
- Puncture-proof foam tyre – No inner tubes required, maintenance kept to a minimum
- 1 inch (25.4mm) centre bore – Simple mounting to standard 1-inch axles with accurate fit
- 73mm axle clearance required – Ensures secure assembly when axle passes fully through centre bore
📋 Technical Details at a Glance
- Category: Launch trolley wheel
- Diameter: 14-1/2" (370mm)
- Tyre type: Non-sink flat tyre, cellular foam
- Puncture resistance: Puncture-proof foam
- Centre bore: 1 inch (25.4mm)
❓ Frequently Asked Questions
Q: Is the tyre puncture-proof?
A: Yes, the tyre is described as puncture proof and constructed from cellular foam so there is no inner tube to puncture.
Q: What axle size does the wheel fit?
A: The centre bore is 1 inch (25.4mm) and the wheel requires 73mm of axle to go through the centre for proper fitting.
Q: Is the wheel suitable for sandy beaches?
A: Yes, the non-sink flat tyre is designed to spread load on soft surfaces such as sand and shingle to help prevent sinking.
🏆 Our Verdict
Suitable for small-boat owners and sailors who launch frequently from soft beaches and need a low-maintenance wheel. The combination of a wide 370mm non-sink tyre and puncture-proof cellular foam construction makes for reliable launches and fewer tyre-related interruptions. Durable, maintenance-light construction should deliver good long-term value for frequent launch use.
