Core drilling machine designed for demanding masonry and concrete work, promising powerful, repeatable coring. The MSW Motor Technics Core Drilling Machine DDM150 brings high power and controlled rotation for clean holes, helping tradespeople finish jobs with confidence. Is the power, precision and safety features right for everyday site use?
⚡ At a Glance
- • Drilling Performance: High-performance 2,000 W motor with core drilling up to 150 mm at speeds to 1,950 rpm
- • Best for: Professional tradespeople and contractors who need reliable large-diameter coring
- • Not ideal for: Occasional DIY users who only need light drilling tasks
A robust coring machine with a 2,000 W motor and a maximum hole diameter of 150 mm. Variable speed up to 1,950 rpm and cast aluminium construction give a balance of power and stability.
Fast Material Removal – With a high-performance 2,000 W motor
The 2,000 W motor supplies sustained power to the coring assembly, allowing the bit to maintain cutting speed under load. Rated top speed reaches 1,950 rpm, helping the diamond core bit penetrate dense masonry efficiently.
Faster through-holes reduce time on each cut, so more cores can be completed in a working day. Consistent power prevents bogging down when coring reinforced concrete.
Clean, Accurate Cores – Thanks to core drilling capacity up to 150 mm
Core drilling capability up to a 150 mm diameter enables larger single-pass holes for pipes and ducts. The design accommodates steady rotation and control required for precise alignment and edge quality.
Accurate, repeatable holes reduce rework and simplify installation of plumbing or electrical runs. Larger diameters handled without multiple passes save time on site layouts.
Safer On-site Use – With residual current protection integrated in the cable
A residual current protection circuit built into the cable helps cut power in the event of an earth fault or leakage. The electrical safeguard adds a layer of protection during wet or conductive conditions often encountered in coring work.
Enhanced electrical safety reduces the risk of shock during operation, particularly when coring in damp environments. Safer operation supports compliance with common site safety practices.
✨ The 4 Key Reasons for MSW Motor Technics Core Drilling Machine DDM150
- Cast aluminium construction – Durable frame reduces flex and improves alignment under load
- Variable suited for hand drilling – Allows control and portability for confined spaces
- Residual current protection – Adds protection against electrical faults on site
- Lifting height 160 mm – Provides sufficient travel for common coring depths without repositioning
📋 Technical Details at a Glance
- Category: Home Improvement
- Product Type: Diamond Core Drill
- Brand: MSW Motor Technics
- Model: MSW-DDM150
- Motor Power: 2,000 W
❓ Frequently Asked Questions
Q: What is the maximum hole diameter this corer can drill?
A: Core drilling is possible up to a diameter of 150 mm, suitable for larger pipe and service penetrations.
Q: How powerful is the motor and how fast does it run?
A: The motor is rated at 2,000 W and reaches speeds up to 1,950 rpm for efficient coring through dense materials.
Q: Are there any built-in safety features for site use?
A: A residual current protection circuit is integrated in the cable to help cut power in case of an earth fault or leakage.
🏆 Our Verdict
The MSW Motor Technics Core Drilling Machine DDM150 suits professional tradespeople and contractors who need reliable, large-diameter coring. Powerful motor, cast aluminium build and integrated residual current protection combine to deliver robust performance and safer operation. Designed for durability and frequent site use, long-term value comes from reduced rework and dependable coring capability.
