Cutting discs deliver precise, long-lasting cuts for metalworking and general workshop use. For tradespeople who value tidy finishes and reliable performance, Merryland Cutting Disc 115 Metal brings reinforced construction and consistent cutting action. Are 25 discs a sensible upgrade over cheaper alternatives for regular workshop use?
⚡ At a Glance
- • Cutting Quality: Smooth, controlled kerf for stainless steel, steel and sheet metal
- • Best for: Metalworkers, fabricators and serious DIYers cutting sheet, pipe and angle iron
- • Not ideal for: Grinding or sanding tasks that require an abrasive grinding wheel
German phenolic resin and refined calcined white corundum form a durable abrasive matrix, combined with a 1.0mm ultra-thin profile and two layers of reinforced fibreglass mesh. Certified to EN 12413 with a 22.23mm bore and a 13,300 RPM rating, supplied as a 25-pack with a safety manual.
Longer-lasting performance - with German phenolic resin and white corundum
German phenolic resin binds refined calcined and white corundum grains into a hard, wear-resistant matrix, delivering sharp abrasive edges throughout the wheel life. White corundum contributes high hardness for efficient cutting on stainless and mild steel.
More cuts per disc compared with lower-grade abrasives, meaning fewer disc changes and less downtime during repetitive cutting tasks.
Thin, precise cuts - with 1.0mm ultra-thin cutting profile
A 1.0mm thickness minimises the kerf and reduces resistance as the wheel penetrates material, allowing faster traversal and cleaner severing. The thin profile is engineered for cut-off accuracy on sheet metal and pipe.
Faster, neater cuts with minimal material loss, ideal for trimming, panel work and accurate offcuts that require a tidy finish.
Reinforced safety and stability - with 2 layers of fibreglass mesh and EN 12413 certification
Two layers of reinforced fibreglass mesh increase tensile strength across the wheel, reducing the risk of fragmentation under stress. EN 12413 and MPA certification confirm compliance with European safety testing at rated speeds up to 13,300 RPM.
Safer high-speed rotation and more confidence when cutting tougher materials, plus a safety manual included to support correct use.
✨ The 4 Key Reasons for Merryland Cutting Disc 115 Metal
- German phenolic resin - Extends disc lifespan, yielding more cuts before replacement
- 1.0mm ultra-thin profile - Reduces kerf for faster cuts and minimal material waste
- 25-pack supply - Keeps workshops stocked for frequent jobs without frequent reordering
- EN 12413 MPA certification - Tested for safety at high RPMs for confident workshop use
📋 Technical Details at a Glance
- Disc Diameter: 115 mm (4.5 inch)
- Thickness: 1.0 mm
- Bore / Arbor: 22.23 mm (7/8 inch)
- Material Composition: German phenolic resin with refined calcined and white corundum
- Reinforcement: 2 layers of reinforced fibreglass mesh
❓ Frequently Asked Questions
Q: What materials can the discs cut?
A: Metal, stainless steel (INOX), steel, angle iron, sheet metal, plastic and steel pipe are listed as suitable materials.
Q: Will the discs fit a standard 4.5-inch angle grinder?
A: Yes, the 115 mm (4.5 inch) diameter with a 22.23 mm bore fits angle grinders and compatible cutting machines.
Q: Are the discs safe to use at high speed?
A: Two layers of reinforced fibreglass mesh and EN 12413 MPA certification indicate tested safety up to the stated maximum of 13,300 RPM, and a safety manual is included in the pack.
🏆 Our Verdict
The Merryland Cutting Disc 115 Metal suits tradespeople, metal fabricators and dedicated DIYers who cut stainless steel, steel and sheet materials regularly. Reinforced construction, ultra-thin 1.0mm profile and EN 12413 certification combine for reliable, accurate cutting performance. Durable materials and a 25-piece pack deliver solid long-term value for busy workshops and regular cutters.
