Meet HPMAISON Tile Drill Bit, a set of tile and masonry drill bits designed to cut cleanly through ceramic, porcelain and glass. They save time and reduce the frustration of chipped edges for DIYers and tradespeople fitting tiles or mirrors. Are the ten sizes and carbide-tipped heads the right addition to your toolbox?
⚡ At a Glance
- • Cutting Quality: Carbide-tipped heads penetrate hard tiles and glass with minimal chipping
- • Best for: DIYers and tradespeople working on tiles, mirrors, and light masonry
- • Not ideal for: Prolonged heavy-duty concrete drilling without water lubrication
Ten-size set uses spear-point tungsten carbide tips and a rotating thread to open neat holes. U type slot assists dust removal while the 3-flats shank keeps a secure hold.
Precise, chip-free holes, with spear-point tungsten carbide tip
Spear-point geometry concentrates cutting force on a small tip and the tungsten carbide material retains sharpness, enabling steady penetration of glazed surfaces. The pointed design helps start holes accurately without slipping.
Accurate starts and sharp tips reduce the need for masking and produce neat openings in ceramic, porcelain and glass.
Stable drilling under load, with 3-flats shank and triangular handle design
A 3-flats shank prevents rotation in the chuck and the triangular handle design improves manual control, reducing slippage. The secure grip lowers the chance of wandering at the start of a hole.
Firm hold and better control make it easier to drill straight, reducing damage to tiles and surrounding surfaces.
Versatile sizing for common jobs, with rotating thread design
Set contains ten sizes from 3mm up to 12mm, including duplicate mid-range sizes, and a rotating thread profile that helps lift chips from the cut. The variety covers typical fixings and fixtures.
A single kit covers most plumbing, electrical and fixture holes, cutting the need to switch between multiple bit sets.
✨ The 4 Key Reasons for HPMAISON Tile Drill Bit
- U Type Slot – Expels dust quickly for uninterrupted drilling and cleaner holes
- 3-Flats Shank – Prevents slipping in the chuck for secure, accurate starts
- Rotating Thread Design – Clears chips as you drill, reducing binding and heat
- Ten Size Range – Covers common 3–12mm holes for fittings and fixings
📋 Technical Details at a Glance
- Category: Tile & masonry drill bits
- Brand: HPMAISON
- Material: Carbide tipped alloy head
- Tip Material: Tungsten carbide
- Design: Spear pointed tip, rotating thread, U type slot
❓ Frequently Asked Questions
Q: Can these bits drill through porcelain tiles and glass?
A: Yes, the spear-point tungsten carbide tip is designed to penetrate porcelain, ceramic tile, glass and mirrors cleanly.
Q: Do I need to use water when drilling hard materials?
A: Yes, when drilling concrete, brick or very hard materials such as marble or granite, use water for lubrication to protect the bit and improve cutting.
Q: Will the shank hold securely in a standard drill chuck?
A: Yes, the 3-flats shank is designed to give a firm grip in the chuck, reducing slip and scratching.
🏆 Our Verdict
Ideal for DIYers and tradespeople who need neat, reliable holes in tile, glass and light masonry. Durable tungsten carbide tips, a U type slot for dust removal and a ten-size selection combine for practical versatility. Durability of the carbide tips and the broad size range deliver strong long-term value for regular use.
