scottchen PRO Sanding Mesh is a sanding mesh designed to remove residue and renew tube surfaces quickly. Clean, smooth finishes make workshop tasks less fiddly and more satisfying. Is the 10.9yd roll and 180-grit specification the right match for regular workshop use?
⚡ At a Glance
- • Cutting Quality: Silicon carbide grain-coated abrasive mesh, 180 grit, delivers aggressive material removal with proven performance on metal surfaces.
- • Best for: DIYers and metalworkers who need a large roll that can be cut to size for surface prep.
- • Not ideal for: Tasks that require finer polishing beyond 180 grit or ultra-fine finishing on soft materials.
Silicon carbide 180-grit mesh supplied as a 1-1/2 inch by 10.9yd roll. Double-sided construction increases usable lifespan and supports cutting strips to fit various grinding tools.
Effective Metal Cleaning - with silicon carbide grain-coated mesh
Silicon carbide grains are bonded to an open abrasive mesh at 180 grit, combining abrasive action with a structure that helps debris clear during use. User feedback highlights strong cleaning performance on copper with minimal clogging.
Aggressive residue removal on metal and tube surfaces without frequent glazing, leaving a renewed, smoother finish for follow-up work.
Custom Strip Sizes - thanks to roll format that cuts to measure
Roll format measures 1-1/2 inch by 10.9yd and can be trimmed into strips of any width for different grinding tools. The flexible sizing supports a range of manual and powered tool setups.
Cut strips to suit hand sanding, bespoke jigs or powered mandrels, reducing waste and matching the abrasive to each job.
Lower Running Costs - with double-sided sanding for extended use
Double-sided sanding effectively doubles the usable abrasive area on each strip, increasing overall utilisation per roll. Product notes mention some grain shedding during use but confirm performance remains effective.
Extended service life reduces how often replacement is needed, making the roll a practical choice for regular workshop use.
✨ The 4 Key Reasons for scottchen PRO Sanding Mesh
- Double-sided sanding - Doubles usable surface area, reducing how often rolls need replacing
- Large roll length - Provides many strips, limiting trips to restock supplies
- Cut-to-size convenience - Cut custom widths to fit different grinding tools easily
- Low clogging on metals - Cleans copper and metals without frequent abrasive glazing
📋 Technical Details at a Glance
- Category: Sanding mesh / sanding screen roll
- Material: Silicon carbide grain-coated abrasive mesh
- Grit: 180 Grit
- Width: 1-1/2 inch (3.8 cm)
- Length: 10.9 yd (10 m)
❓ Frequently Asked Questions
Q: Can the roll be cut to fit different sanding tools?
A: Yes. Roll format can be cut into different sizes and is widely applicable for different grinding tools.
Q: Will the mesh clog when cleaning metals like copper?
A: User feedback highlights effective cleaning of copper without significant clogging, indicating good performance for metal work.
Q: Is sand shedding a problem during use?
A: Some sand falling down can occur due to the silicon carbide workmanship, but the manufacturer notes this does not affect the sanding effectiveness.
🏆 Our Verdict
Ideal for DIYers, metalworkers and workshops that need a durable, large-format abrasive for cleaning and surface preparation. Large, double-sided silicon carbide mesh delivers aggressive cleaning and low clogging on metals, while allowing strips to be cut to fit many tools. Strong long-term value comes from extended usable life and the roll format's flexibility.
