Home plumbing equipment designed to move wastewater from showers and sinks into the main drain with minimal disruption. Quiet operation and compact dimensions make Sanigo Sanitary Shredder Silent Waste Pump a practical choice for retrofit projects and confined spaces. Does it deliver the power and reliability required for basement or attic installations?
⚡ At a Glance
- • Pumping Performance: 200W motor, up to 7m vertical lift and 100L/min maximum flow
- • Best for: Basement, attic and under-sink shower or sink installations
- • Not ideal for: Primary gravity-fed drainage or large commercial sewer systems
Compact shower drain pump with a 200W motor and dual inlets. Designed to move wastewater vertically or horizontally over significant distances.
Connect multiple appliances easily - With two 40mm inlets
Two 40mm diameter inlets accept connections from separate sanitary appliances, allowing sinks, showers or bathtubs to feed the same pump. Internal channels direct collected waste toward the motorised pumping stage for discharge to the main plumbing.
Flexible hookup reduces extra pipework and lets several fittings share a single discharge point. Ideal for combining a shower and basin in a cellar or loft conversion.
Reliable reach for awkward locations - Thanks to a 200W motor
A 200W motor supplies the pressure required to pump wastewater up to 7 metres vertically or across long horizontal runs, maintaining a steady flow under load. The motor-driven impeller sustains up to 100 litres per minute under optimal conditions.
Long vertical and horizontal reach means showers or sinks can be installed well below or away from the main stack. Useful when gravity drainage is impractical.
Quiet, compact installation - With low noise operation and high temperature tolerance
A compact casing allows installation under sinks or behind toilets in tight voids, while acoustic design elements keep operational noise in the 30-40 dB range. The unit is rated to handle wastewater temperatures up to 75°C.
Low noise keeps living spaces undisturbed and compact size fits many retrofit cavities. High temperature tolerance means safe handling of warm waste water from showers and sinks.
✨ The 4 Key Reasons for Sanigo Sanitary Shredder Silent Waste Pump
- Low noise operation - Keeps bathrooms and living spaces peaceful during use
- Compact footprint - Fits under sinks or behind toilets in tight voids
- Heat-resistant up to 75°C - Handles warm wastewater without degrading components
- Enables retrofit installations - Avoids major pipework and saves on extensive plumbing
📋 Technical Details at a Glance
- Category: Sanitary shredder / waste pump
- Motor power: 200W
- Inlets: Two 40mm diameter inlets
- Max vertical lift: 7 metres
- Max horizontal reach: 70 metres
❓ Frequently Asked Questions
Q: Can several appliances be connected to the pump?
A: Yes, two 40mm inlets allow multiple sanitary fittings, such as a shower and sink, to feed the same pump.
Q: How far and how high can the pump move water?
A: The pump can lift wastewater up to 7 metres vertically and push it up to 70 metres horizontally, with a maximum flow of 100 L/min.
Q: Is the pump suitable for quiet areas and warm water use?
A: Quiet operation at around 30-40 dB makes it suitable for living spaces, and the unit can withstand temperatures up to 75°C.
🏆 Our Verdict
The Sanigo Sanitary Shredder Silent Waste Pump is suitable for homeowners and tradespeople who need reliable drainage in basements, attics or under-sink retrofit projects. Dual inlets, compact form and a 200W motor that handles long lifts and runs are the main strengths. While no price is listed here, the ability to avoid major new pipework suggests useful long-term value through installation savings and practical durability.
