Heat-resistant tape for sublimation and heat-press work, olyee Heat Resistant Tape keeps transfers fixed at elevated temperatures. Crafters and small-business makers gain neater alignment and fewer ruined prints. Is this the practical addition needed for a reliable workshop kit?
⚡ At a Glance
- • Heat Resistance: Instantaneous about 300C / 572F, short time about 125C / 257F, long time about 100C / 212F
- • Best for: Heat-transfer vinyl and fabric printing where secure placement and clean removal matter
- • Not ideal for: Covering large areas in one pass because each roll is 10mm wide
Four clear PET rolls, each 30m long and 10mm wide, suit detailed heat-press and sublimation tasks. Special agent-treated adhesive removes cleanly while tolerating a range of temperatures.
Secure placement during heat pressing - with high-temperature PET construction
Durable PET construction combines with an adhesive treated to resist high temperatures, allowing brief exposure up to about 300C and sustained use around 100C. Adhesion strength balances hold and removability so wrapped or uneven surfaces stay fixed.
Firm holds keep vinyl and transfers exactly where set during pressing, reducing misalignment and wasted prints. Reviewers report secure placement throughout heat cycles.
No sticky residue after removal - thanks to special agent treatment on the adhesive
Special agent treatment on the adhesive reduces remaining tack after peeling, so the surface comes away without remnants. Designed for clean separation even on delicate fabric and coated surfaces.
Clean removal preserves fabric appearance and avoids extra cleaning steps after pressing. Users note no marks or sticky traces left behind.
Useful beyond fabrics - with chemical and mechanical resistance
High insulation and resistance to acid, low electrolysis, abrasion and tear make the tape suitable for light electronic protection, solder area masking, painting and packing. Mechanical properties allow reliable wrapping even on uneven shapes.
Suitable for crafters who also do small electronics or maintenance tasks, protecting components during short heat or repair operations. The multi-purpose nature adds workshop flexibility.
✨ The 4 Key Reasons for olyee Heat Resistant Tape
- Clear PET finish - aids precise alignment and accurate placement during pressing
- No-residue adhesive - leaves fabrics and surfaces clean after peeling
- Pack of four 30m rolls - provides sustained supply for frequent crafters and small businesses
- Abrasion and chemical resistance - supports light electronic masking and multiple DIY uses
📋 Technical Details at a Glance
- Category: Heat-resistant transfer tape
- Material: PET (polyethylene terephthalate)
- Rolls per pack: 4
- Length per roll: 30m / 108ft
- Width: 10mm / 0.39 inch
❓ Frequently Asked Questions
Q: Will the tape leave adhesive residue on fabrics?
A: No, the adhesive has a special agent treatment designed so the surface stays free of remnants after peeling.
Q: Can the tape handle heat-press temperatures?
A: Yes, the tape tolerates instantaneous temperatures up to about 300C, short-time use around 125C and continuous exposure near 100C, as stated in the product description.
Q: Is the tape suitable for precise placement during pressing?
A: Yes, the clear PET finish helps with alignment and users report accurate placement and secure holding during heat cycles.
🏆 Our Verdict
Suitable for hobbyists and small-scale heat-press users who need precise placement and clean removal. The main selling point is a clear, high-temperature PET tape with a special no-residue adhesive that holds through heat cycles. While the pack focuses on narrow 10mm rolls, the four-roll supply and durable construction deliver good long-term value for regular crafters and workshop use.
