Corrugated roofing accessories designed to protect fixings from wind and rain while keeping joints neat. Homeowners and roofers gain reassurance from a simple, durable seal. Do Falcon Workshop Supplies Ltd Corrugated Roofing Strap Caps fit common screw sizes and stand up to UK conditions?
⚡ At a Glance
- • Weather Protection: Keeps fixings sealed against rain and debris, extending fastener life
- • Best for: DIYers and roofing contractors who need a quick, protective finish
- • Not ideal for: Fasteners outside the 4-5mm diameter range or oversized screws
Caps are 20mm wide and 13mm high when closed, with a 5mm hole sized for 8g/10g screws. Manufactured in the UK from quality raw materials to protect corrugated roofing fixings from the elements.
Weatherproof Fixings - thanks to a sealed strap cap design
A one-piece cap slips over the fixing and covers the head, creating a barrier against water and debris. The 5mm aperture aligns with common 4-5mm fasteners so the cap sits flush on corrugated sheets.
Reduced risk of water ingress around screw heads keeps roof sheets and supporting timbers drier for longer. Roof maintenance visits can be less frequent when fixings remain sealed.
Fast, Simple Installation - with a one-piece, slip-on format
A single component fits over the fixing prior to installation, removing the need for separate washers or sealants. The clear design allows quick visual alignment on corrugated profiles.
Installation speed improves on-site, saving time on runs of screws and repairs. Less fiddly fitting makes work easier on ladders and in confined spaces.
Compatibility with Standard Fixings - thanks to a 5mm hole for 8g/10g screws
Central aperture measures 5mm, which accommodates 8g/10g screws and nails roughly 4-5mm in diameter. The cap dimensions of 20mm by 13mm yield a low profile on corrugated sheets.
Fits the most commonly used roofing fasteners without modification, avoiding the need to change screw types. Low profile keeps caps discreet while still providing protection.
✨ The 4 Key Reasons for Falcon Workshop Supplies Ltd Corrugated Roofing Strap Caps
- UK-manufactured - Consistent quality and reliable material performance on roofs
- One-piece design - Fits over fixings quickly, saving installation time per cap
- Clear finish - Blends with roof sheets for a discreet, neat appearance
- 5mm hole size - Compatible with 8g/10g screws, fits 4-5mm diameter fasteners
📋 Technical Details at a Glance
- Category: Corrugated roofing screw cap
- Brand: Falcon Workshop Supplies Ltd
- Manufacturer: Falcon Workshop Supplies Ltd
- Material: Plastic
- Quantity: 50
❓ Frequently Asked Questions
Q: What screw sizes do the caps accept?
A: The central hole measures 5mm and is suitable for 8g/10g screws or nails around 4-5mm in diameter.
Q: Are they easy to fit on corrugated sheets?
A: Yes, a one-piece design slips over the fixing prior to installation for quick and straightforward fitting.
Q: Will they protect fixings from the weather?
A: Manufactured in the UK from quality raw materials, the caps are intended to shield fasteners from rain and debris.
🏆 Our Verdict
Ideal for DIYers and roofing contractors who need a quick, reliable way to protect corrugated fixings. Clear, UK-manufactured strap caps combine simple slip-on installation with compatibility for standard 4-5mm fasteners. While a small upfront purchase, durable protection helps avoid water-related repairs and adds long-term value.
