Automotive repair tool designed to remove wiper arms and battery terminal bearings safely and accurately. Useful for DIYers and garage technicians who need a corrosion-resistant, heavy-duty puller. Is the DASBET Wiper Arm Puller the right tool for occasional workshop and roadside repairs?
⚡ At a Glance
- • Pull Range: Jaw opening 6–28 mm (1/16"–1-1/16") for a wide variety of posts
- • Best for: DIY enthusiasts and mechanics needing a robust, corrosion-resistant puller for wiper arms and terminal bearings
- • Not ideal for: Tasks requiring specialised or manufacturer-specific removal tools beyond tapered splined posts
Heat-treated 45# carbon steel construction gives high hardness and corrosion resistance. Two-jaw design with a screw pad aligns to the top of splined posts for controlled removal of wiper arms and terminal bearings.
Durable, workshop-ready construction - with heat-treated 45# carbon steel
Forged 45# carbon steel undergoes a special heat-treatment process to raise hardness and resist deformation under load. Corrosion-resistant finishing helps preserve the jaws after repeated exposure to the elements.
High-strength construction stands up to routine garage use and occasional heavy pulls. Long service life reduces the need for frequent replacement in a home or professional toolbox.
Wide compatibility for splined posts - thanks to 6–28 mm jaw opening
Adjustable jaws cover a 6–28 mm range, matching common tapered spline sizes and terminal clamp diameters. Outer diameter measures 48 mm to suit typical spline heads.
One tool handles the majority of wiper-arm and terminal-bearing removal jobs without swapping adapters. Saves time when working across different vehicle makes and older models.
Controlled, damage-free removal - with knurled cone and spline-aligned screw pad
Knurled cone forces the jaws under the clamp while a centre screw lifts the clamp off the post, and the screw pad aligns with the top of the spline post to centre the pull. Level alignment during operation maintains correct geometry for a straight extraction.
Clamps and splined posts remove cleanly without bending or distortion. Simple manual operation keeps risk of accidental damage to the wiper assembly to a minimum.
✨ The 4 Key Reasons for DASBET Wiper Arm Puller
- Corrosion-resistant finish - Withstands workshop conditions for longer service life and frequent use
- Spline-aligned screw pad - Ensures straight pulls without damaging splined posts or terminals
- Knurled cone mechanism - Allows controlled lifting of clamps with minimal effort
- Compact single-tool package - Ready for one-off repairs and easy storage in a toolbox
(Exactly 4 points. Feature in bold, then hyphen, then benefit.)
📋 Technical Details at a Glance
- Category: Automotive Parts and Accessories
- Brand: DASBET
- Product ID: B09JNS94JP
- Material: 45# carbon steel, heat-treated
- Jaw opening: 6–28 mm (1/16"–1-1/16")
❓ Frequently Asked Questions
Q: Can the tool remove bolted-on wiper arms that fit over a tapered spline?
A: Yes, the tool is designed to remove bolted-on windshield wiper arms that fit over a tapered spline by aligning the screw pad with the top of the splined post.
Q: What sizes of posts and clamps does the puller accommodate?
A: Jaw opening covers 6–28 mm (1/16"–1-1/16") and the outer diameter is 48 mm (1-7/8"), suitable for a wide range of splined posts and terminal clamp sizes.
Q: Is the construction robust enough for workshop use?
A: Manufactured from 45# carbon steel with a special heat-treatment process and corrosion-resistant finishing; user feedback describes good quality and usefulness for one-off jobs.
🏆 Our Verdict
Suitable for DIYers and small garages that need a straightforward tool to remove wiper arms and terminal bearings. Heat-treated steel, a two-jaw design and a spline-aligned screw pad deliver controlled, damage-free removal. Practical for occasional repairs, with robust materials designed to last through many jobs.
