Home lighting replacement promising dependable, clean-burning light for lanterns, porches and camp sites. Keep peace of mind during power cuts with a long, cut-to-size wick, sourcing map Oil Lamp Wick. Will the 10mm width and two-metre length suit your burner and storage needs?
⚡ At a Glance
- • Wicking Performance: Capillary action soaks lamp oil evenly when pre-soaked, helping maintain a stable flame.
- • Best for: Owners of oil lanterns, kerosene burners, and DIY lamp projects for porch or camping lighting.
- • Not ideal for: Users who need pre-fitted, model-specific wicks or exact factory lengths for a particular burner.
Flat cotton construction, 10mm wide, 2 metres long and 2mm thick, supplied as a single wick. Pre-soaking in lamp oil for around 30 minutes and regular trimming gives the cleanest burn.
Steady, consistent flame - with flat cotton construction
Flat cotton fibres draw lamp oil along the wick by capillary action, the 10mm width spreading the fuel feed to the flame. The 2mm thickness helps the wick retain oil without collapsing under heat.
Even fuel delivery reduces flicker and minimises smoking when the wick is prepared correctly. A stable flame gives reliable light for porch, camping or indoor emergency use.
Custom length for different lamps - with cut-to-size design
Two metres of soft cotton can be trimmed to any required length and the fibres cut cleanly, making multiple replacements possible from a single piece.
Create suitably sized wicks for shallow or deep burners without buying pre-sized spares. Quick trimming means a fast repair on site or at the campsite.
Practical for emergencies and outdoor use - with durable cotton material
Long, soft cotton resists rapid wear under normal burning conditions, and holds oil well after soaking to maintain combustion. The single-piece supply is easy to store.
Keep spare lengths ready for power cuts or outdoor trips, confident that the wick will burn well after correct soaking and routine trimming. User feedback notes good durability and reliable burning.
✨ The 4 Key Reasons for sourcing map Oil Lamp Wick
- Two-metre length - Make multiple replacements and keep spares for emergencies and camping
- 10mm flat width - Fits flat burners and promotes a stable, even flame
- Soft cotton material - Cuts cleanly, resists fraying and burns consistently
- Simple care instructions - Soak before lighting and trim regularly to avoid smoke and flicker
📋 Technical Details at a Glance
- Category: Home
- Product Type: Oil lamp wick
- Brand: sourcing map
- Material: Cotton
- Flat Width: 10mm / 0.39 inch
❓ Frequently Asked Questions
Q: Can I cut the wick to fit my lamp?
A: Yes, the soft cotton construction is designed to be cut to the desired length, making it easy to fit a range of burners.
Q: How do I avoid smoking or flickering?
A: Immerse the wick in lamp oil for around 30 minutes before lighting, keep the flame height moderate, and trim burnt edges regularly to reduce smoke and flicker.
Q: Can I change fuel types with the same wick?
A: If the fuel type is changed, replacing the wick is recommended, as different fuels can affect burning behaviour and wick performance.
🏆 Our Verdict
Ideal for owners of oil lanterns, campers and households preparing for power cuts who need a flexible replacement wick. The long, flat cotton construction is easy to cut, soaks well and delivers a steady flame when maintained. Good value for a practical spare, worth keeping on hand for routine upkeep and emergencies.
