Climbing anchor kit designed to create reliable fixed points for rock and structural work. Confidence for climbers, riggers and rescue teams relying on a dependable single anchor point. Is Tiiyee Climbing Anchor Bolt Set the right kit for your routes and ropework?
⚡ At a Glance
- • Holding Strength: Rated around 25KN pulling force for single-anchor loads
- • Best for: Rock climbers, mountaineers and professionals needing fixed single anchor points
- • Not ideal for: Situations requiring multi-point or dynamic load-rated anchor systems
Four-part expansion anchor set with expansion screw, nut, hanger and washer. Designed for fixed single-anchor placement on rock and structural substrates.
Dependable Load Bearing – With four-part expansion screw
Expansion screw, nut, hanger and washer combine so the expansion piece widens inside the drilled hole when subjected to force, locking the anchor mechanically. The construction is intended to transfer load to the substrate rather than relying on external components.
Secure single-anchor points handle heavy loads, suitable for attaching ropes or equipment where a fixed point is required.
Corrosion Resistance for Outdoor Use – With 304 stainless steel construction
Components are made from 304 stainless steel, chosen for its resistance to oxidation and wear in wet or salty environments. The material is specified as suitable for use in chemical and seawater conditions.
Reliable performance after exposure to rain, sunlight, snow and marine conditions, reducing the need for frequent replacement.
Straightforward Installation – Thanks to an 8mm drill requirement and compact parts
The kit requires an 8mm (0.3in) drill bit and comprises an expansion screw, nut, hanger and washer to create the anchor. Assembly focuses on mechanical expansion inside the substrate rather than adhesive or specialised bonding.
Easy to carry and install on rock or structural surfaces, useful for climbers, riggers and aerial-work teams needing quick fixed points.
✨ The 4 Key Reasons for Tiiyee Climbing Anchor Bolt Set
- Four-part expansion assembly – Locks securely into drilled holes for reliable single-anchor holding power
- 304 stainless steel – Withstands rain, snow and seawater exposure for long-term corrosion resistance
- Compact, lightweight components – Easily transported on multi-pitch climbs and stored in a tool kit
- Simple installation – Requires 8mm drill bit and basic hand tools for quick setup
📋 Technical Details at a Glance
- Category: Climbing anchor bolts and hangers
- Material: 304 stainless steel
- Rated load: Approximately 25KN (2500KG) pulling force
- Drill bit size: 8mm / 0.3in
- Components: Expansion screw, nut, hanger and washer
❓ Frequently Asked Questions
Q: What pulling force are the anchors rated for?
A: The anchors are rated at about 25KN, equivalent to roughly 2500KG of pulling force.
Q: What drill bit size is required for installation?
A: An 8mm (0.3in) drill bit is specified for creating the hole for the expansion screw.
Q: Are the anchors suitable for use in wet or coastal environments?
A: Yes, the components are made from 304 stainless steel and are described as suitable for rain, sunlight, snow and seawater exposure.
🏆 Our Verdict
Suitable for climbers, riggers and rescue teams who need dependable, single-point anchors. Four-part expansion construction and 304 stainless steel give strong load capacity and corrosion resistance. Durable materials and simple installation promise good long-term value for frequent outdoor and marine use.
