Automotive replacement bulbs designed to upgrade reverse, parking and signalling with brighter, whiter light, AGLINT 1156 LED Bulbs. Improved visibility makes reversing and signalling feel more secure on dim roads. Are these a simple swap for common 1156 sockets and worth fitting for everyday driving?
⚡ At a Glance
- • Light Output: 31 SMD LED array, 1000LM luminous flux and 360° projection for broad illumination
- • Best for: Drivers who want brighter reverse, tail and signalling lights for clearer visibility
- • Not ideal for: Vehicles with strict CANbus systems without load resistor modification
A 31-chip SMD LED array produces around 1000 lumens with a 360-degree beam. White 6500K colour temperature yields a crisp, daylight-like output suited to reversing and signalling.
Clearer Rear Visibility - thanks to a 31 SMD LED array and HD projector
A combination of 24×4014 chips, 6×2835 chips and a 3030 chip creates a focused yet wide beam, while an HD projector design spreads light evenly around the socket. Rated output is approximately 1000LM with a 360° lighting angle and a 6500K white tone.
Brighter, whiter illumination helps spot obstacles and pedestrians when reversing and makes signals easier for other drivers to see.
Straightforward Fitment Across Many Cars - with international 1156 socket compatibility
Direct replacement for common bases including BA15S, P21W and a range of equivalent codes listed in the fitment notes. Designed as plug-and-play for compatible sockets, with voltage tolerance from 12V to 24V.
Quick installation into matching sockets avoids wiring changes for most cars, allowing fast upgrades to reverse and signal lamps.
Lower Heat and Longer Life - with low power draw and energy-efficient LED chips
Low power consumption of 6W per bulb and efficient SMD chips reduce heat generation compared with halogen equivalents, while energy-efficient operation supports extended service life. Product notes also recommend a 50W 6ohm load resistor where needed to prevent hyper-flash or error codes.
Reduced heat and modest power draw mean less strain on lamp holders and longer running life, suitable for frequent use such as daytime running or reversing lights.
✨ The 4 Key Reasons for AGLINT 1156 LED Bulbs
- 31 SMD LED configuration - Dramatically brighter, more consistent beam than halogen
- 360° projection - Wide coverage reduces dark spots behind the vehicle
- 12V–24V compatibility - Works across cars, vans and some light commercial vehicles
- Plug-and-play 1156 socket fit - Fast replacement for BA15S/P21W style holders
📋 Technical Details at a Glance
- Category: Automotive bulbs
- Brand: AGLINT
- Model: 1156 LED (P21W / BA15S fit)
- Bulb type: LED SMD
- Socket compatibility: BA15S, P21W, 1156 and related codes
❓ Frequently Asked Questions
Q: Are these compatible with my car's 1156 socket?
A: Compatibility covers common 1156/BA15S/P21W socket types and equivalent codes listed in fitment notes; check your vehicle manual or existing bulb code before fitting.
Q: Will fitting these trigger dashboard errors or hyper-flash?
A: Some users report no CANbus errors or fault codes, but the manufacturer notes that a 50W 6Ω load resistor may be required to prevent hyper-flash or error messages on certain vehicles.
Q: How bright and what colour is the light?
A: Rated output is about 1000 lumens with a 6500K white colour temperature and a 360° lighting angle, described as roughly four times brighter than a halogen equivalent.
🏆 Our Verdict
Suitable for drivers and light-vehicle owners who want a straightforward upgrade to brighter reverse and signalling lights. The 31 SMD LED array, 360° projection and 6500K white output are the main selling points for visibility and crisp signalling. With low power draw and reported longevity, the bulbs represent practical long-term value for those seeking a reliable lighting upgrade.
