Boat launch trolley wheels that aim to make moving small dinghies across sand and shingle straightforward. Solid rubber tyres and wide contact patches in leisure MART Dinghy Boat Launch Trolley Wheels give steadier launches and reduce effort. Are these the right fit for frequent beach use and straightforward installation?
⚡ At a Glance
- • Rolling Performance: 10-inch solid rubber tyres with polypropylene centres, 1 inch plain bore and 3 and 3/4 inch tyre width
- • Best for: Small dinghy owners launching from soft shorelines who need a robust, low-maintenance wheel pair
- • Not ideal for: Heavy commercial launches or boats requiring tyres with pneumatic cushioning
Pair of 10-inch launch trolley wheels with solid rubber tyres and polypropylene centres. Each wheel has a 1 inch plain bore, 57.2mm bore width and a maximum weight rating of 60kg per wheel.
Easier beach launches, thanks to 10-inch solid rubber tyres
Ten-inch diameter solid rubber tyres with a 3 and 3/4 inch tyre width create a larger rolling surface and resist punctures since no inner tube is present. Polypropylene centres locate the bore and keep the wheel geometry stable.
Less effort when pushing a trolley across sand or shingle, with fewer interruptions from tyre punctures or deflation.
More stable tracking, with wide tyre width and paired setup
Tyre width of 3 and 3/4 inches increases the contact patch and, when fitted as a pair, spreads load laterally across soft terrain. Pair configuration and matching centres maintain alignment during launches.
Reduced tendency for sideways dig-in and steadier movement when moving a dinghy from shore to water.
Straightforward fitting and defined load tolerance, with 1 inch plain bore and 57.2mm bore width
Plain 1 inch bore and a specified bore width of 57.2mm are provided as the axle interface dimensions, while each wheel is rated to carry up to 60kg. Polypropylene centre construction keeps those dimensions consistent.
Clear axle measurements make wheel selection simpler and the 60kg per wheel rating helps assess suitability for a particular dinghy when used in pairs.
✨ The 4 Key Reasons for leisure MART Dinghy Boat Launch Trolley Wheels
- Solid rubber tyres - Maintenance-free traction across rocky and sandy shores
- 3 and 3/4 inch tyre width - Wider contact patch for improved lateral stability
- 1 inch plain bore - Clear axle interface for straightforward replacement or upgrade
- Pair supply - Two-wheel setup enables a stable wide-track launch trolley
📋 Technical Details at a Glance
- Category: Automotive Parts and Accessories
- Brand: leisure MART
- Product type: Dinghy Boat Launch Trolley Wheels (pair)
- Diameter: 10 inch
- Tyre type: Solid rubber tyre
❓ Frequently Asked Questions
Q: Are these wheels suitable for sand and shingle?
A: User feedback confirms sturdy performance on sand and shingle, and solid rubber tyres with a wide contact patch are specified for those conditions.
Q: What axle size do the wheels fit?
A: Wheels have a 1 inch plain bore with a bore width of 57.2mm, which defines the axle interface for fitting.
Q: How much weight can each wheel carry?
A: Each wheel is rated to carry up to 60kg, so total trolley capacity depends on how many wheels are used and the overall trolley design.
🏆 Our Verdict
Ideal for recreational sailors and small dinghy owners who need robust, low-maintenance launch wheels for beach use. Solid rubber tyres paired with polypropylene centres and a defined 1 inch bore deliver clear fitting dimensions and dependable rolling behaviour. Durable construction and simple specifications should translate into seasons of reliable service and straightforward replacement when needed.
