A niche BISS accessory that links server-grade SAS drives with compatible SATA controllers, designed for short, dependable connections. Users who fit drives into removable caddies or hybrid arrays gain convenience and tidiness. Will the chenyang SAS to SATA Cable work with your motherboard and drives?
⚡ At a Glance
- • Compatibility: SFF-8482 (29-pin) to SATA 22-pin connection, requires SAS-capable or hybrid controller; not compatible with plain SATA motherboards unless SAS chipset present
- • Best for: Technicians and system builders using SAS HDDs/SSDs in hybrid controllers or removable drive caddies
- • Not ideal for: Users who expect a plug-and-play SATA-to-SAS converter on legacy motherboards without SAS support
A 10 cm cable that maps an SFF-8482 SAS connector to a SATA 22-pin interface with a 15-pin power port. Intended for use with SAS-compatible or hybrid SATA controllers and removable drive caddies.
Direct SAS connectivity – with an SFF-8482 to SATA 22-pin connector
The SFF-8482 end interfaces with SAS HDD/SSD drives while the SATA 22-pin end mates with controllers that accept hybrid connections. A separate 15-pin SATA power port supplies standard drive power.
Connect a SAS drive with an SFF-8482 port to a SAS-capable or hybrid SATA controller without rewiring. Suits quick swaps in server environments where compatible controllers are already present.
Neat cabling in tight bays – thanks to a short 10 cm lead
A compact 10 cm cable length reduces excess slack and keeps connections close to drive bays and caddies. User feedback highlights solid build quality that holds up during repeated insertions.
Keep rack and caddy interiors tidy while avoiding cable strain during hot-swaps. Robust construction supports frequent handling in removable drive enclosures.
Clear compatibility boundaries – with explicit chipset requirements
Connections depend on controller and drive chipsets: SAS drives require a SAS-capable controller or hybrid controller to function via the cable. SATA drives may not work on SAS-only motherboards unless the drive contains SAS-compatible chips.
Save time by checking motherboard and drive chipset compatibility before use. Avoid failed connections by confirming hybrid or SAS chipset support beforehand.
✨ The 4 Key Reasons for chenyang SAS to SATA Cable
- SFF-8482 connector - Enables direct SAS drive connection to hybrid controllers and backplanes
- 15-pin SATA power port - Supplies standard SATA power without additional adapters or modifications
- 10 cm cable length - Reduces cable clutter and fits neatly in tight server bays
- Durable construction - Withstands repeated hot-swap cycles in removable drive caddies
📋 Technical Details at a Glance
- Category: BISS
- Connector type: SFF-8482 (29-pin) to SATA 22-pin
- Power: 15-pin SATA power port
- Length: 10 cm
- Compatible with: SAS HDD/SSD when used with SAS-capable or hybrid SATA controllers
❓ Frequently Asked Questions
Q: Can a SAS drive be used on a regular SATA motherboard with this cable?
A: No. SAS drives require a SAS-capable or hybrid controller; a standard SATA motherboard without SAS chipset will not support a SAS drive via this cable.
Q: Can a SATA drive be connected to a SAS-only motherboard using the cable?
A: Not reliably. A SATA drive will only work on a SAS motherboard if the drive contains SAS-compatible chips, otherwise connection will fail.
Q: Is the cable suitable for removable drive caddies and tight rack spaces?
A: Yes. The 10 cm length and reported sturdy build make the cable well suited to removable drive caddies and cramped server bays.
🏆 Our Verdict
Suitable for system builders and IT technicians who need a compact way to link SAS drives to SAS-capable or hybrid SATA controllers. The straightforward SFF-8482 to SATA 22-pin wiring with a 15-pin power port and reported solid build is the cable's main advantage. As a pragmatic, long-lasting adapter for compatible setups, it represents a sensible addition to server toolkits.
