Keple Drywall Screws are drywall fixings designed to hold plasterboard securely to wood and metal, with a bugle head that sits flush for neat finishes. Faster installation and reduced surface damage appeal to tradespeople and keen DIYers. Do they deliver durable, rust-resistant performance for indoor building work?
⚡ At a Glance
- • Holding Power: Coarse thread and sharp point grip timber and thin metal studs securely
- • Best for: Fastening plasterboard to wood or metal, ceiling joists and indoor carpentry
- • Not ideal for: Outdoor or continuously wet environments without additional corrosion protection
Carbon steel screws use a black phosphate coating, coarse threads and a bugle head for indoor drywall and wood fastening. Countersunk Phillips PH2 drive and 70mm length suit fixing thicker plasterboard and panels.
Secure holds – thanks to sharp point and coarse thread
A sharp pointed tail starts penetration without pilot holes while coarse threads bite into timber and thin metal studs, increasing pull-out resistance. The thread profile is designed to draw plasterboard tight to the framing.
Panels stay firmly fixed to joists and studs, reducing the need for extra fixings and lowering the risk of movement during finishing.
Flush finishing – with countersunk bugle head
Bugle head geometry disperses load and sits flush with plasterboard, preventing the head from tearing the paper surface. The countersunk shape leaves a shallow recess suitable for jointing compound.
Smoother skim coats and less surface rework, making tape and jointing quicker and neater on completion.
Indoor corrosion resistance – thanks to black phosphate coating
A phosphate coating on carbon steel creates a dark protective layer that helps slow the onset of rust from incidental moisture in plaster residues. The finish is intended for typical indoor environments.
Reduced risk of rust staining on interior walls, extending the usable life of fixings for standard indoor applications.
✨ The 4 Key Reasons for Keple Drywall Screws
- Carbon steel construction - Delivers strong shear strength for reliable load-bearing joins
- Bugle head geometry - Prevents surface damage and enables flush finishes on plasterboard
- Sharp pointed tip - Reduces pre-drilling, speeds installation into timber and thin metal
- Phillips PH2 drive compatibility - Compatible with standard bits for quick, secure screw driving
📋 Technical Details at a Glance
- Category: Drywall screws
- Brand: Keple
- Material: Carbon steel
- Coating: Black phosphate
- Thread: Coarse thread
❓ Frequently Asked Questions
Q: Are these screws suitable for securing drywall to ceiling joists?
A: Yes. Screws are described as thin enough to fasten sheets of drywall to ceiling joists without damaging the materials.
Q: Can these screws be used outdoors or in wet rooms?
A: The black phosphate coating helps reduce rust from incidental moisture, but screws are mostly specified for indoor projects and are not described as weatherproof for prolonged outdoor or wet use.
Q: What driver bit do they require?
A: A Phillips head screwdriver bit, specifically a 2PH, is recommended for installation.
🏆 Our Verdict
Best suited to tradespeople and DIYers who need reliable fixings for plasterboard and wood in indoor settings. The combination of carbon steel, coarse thread and a bugle head ensures secure, flush fastening and simpler finishing. Offers good long-term value thanks to durable materials and a corrosion-resistant coating for routine interior projects.
