Replacement immersion heater element for unvented cylinders, designed to restore hot water quickly and reliably. Homeowners and installers will appreciate an easy fit and added safety protection. Is Generic Cotherm Immersion Heater Element ELE14IN800UNV the right choice for your cylinder replacement?
⚡ At a Glance
- • Heating Performance: 14" length with 8mm element diameter and a 1.75" BSP head for standard unvented cylinder installations
- • Best for: Homeowners and installers replacing failed elements in unvented hot-water cylinders
- • Not ideal for: Systems that require a different element length or a non-BSP head fitting
A 14" unvented immersion heater element supplied with a 1.75" BSP head and an 8mm diameter element. Cotherm TSE thermostat is fitted and secondary protection is included for extra safety.
Quick replacement, thanks to the 1.75" BSP head
A 1.75" BSP head matches common immersion fittings used on many unvented cylinders, allowing the element to be secured using the existing gland. The standard thread reduces the need for adaptors when swapping elements.
Fast swap-outs minimise downtime and remove the need for major plumbing changes. Ideal for emergency replacements or routine maintenance.
Consistent temperature control, thanks to the Cotherm TSE thermostat
Cotherm TSE thermostat monitors and regulates water temperature within the heater assembly, operating as the primary control for heating cycles. The thermostat works with the element to maintain set temperatures under normal household loads.
Steady hot-water delivery helps avoid temperature swings during typical use. Suitable where reliable temperature regulation matters day to day.
Added safety, thanks to secondary protection
Secondary protection is integrated as an independent safeguard against over-temperature or thermostat failure, acting as a backup cutoff mechanism. This adds a further layer of protection beyond the primary thermostat.
Extra safety reduces the risk of overheating incidents and gives greater peace of mind for homeowners. Particularly useful in systems where safety redundancy is preferred.
✨ The 4 Key Reasons for Generic Cotherm Immersion Heater Element ELE14IN800UNV
- Quick installation – Fits standard immersion mounts for speedy replacement without extra parts
- Cotherm TSE thermostat – Maintains steady temperature under normal household demand
- Secondary protection – Triggers a safety cutoff in over-temperature situations
- Positive user feedback – Customers report easy fitting and reliable operation after installation
📋 Technical Details at a Glance
- Category: Immersion heater element
- Brand: Generic
- Length: 14"
- Element diameter: 8mm
- Head size: 1.75" BSP
❓ Frequently Asked Questions
Q: Is this element suitable for unvented cylinders?
A: Yes, the name and descriptions identify it as a replacement element for unvented cylinders.
Q: Does the element include a thermostat?
A: Yes, a Cotherm TSE thermostat is specified as the thermostat type fitted to the element.
Q: Is there any extra safety fitted?
A: Yes, secondary protection is included as an additional safety measure.
🏆 Our Verdict
Suitable for homeowners and installers who need a straightforward replacement for unvented cylinder elements. A straightforward feature set, including a 1.75" BSP head, Cotherm TSE thermostat and secondary protection, focuses on compatibility and safety. The combination of standard fittings and user-reported ease of installation makes this a practical, value-focused replacement for many cylinders.
