Satellite switching hardware designed to select and route signals from multiple LNBs with minimal loss. Perfect for installers and keen hobbyists who want fewer cable swaps and steadier reception. Is the DollaTek Diseqc 4-way Wideband Switch the practical choice for your multi-satellite installation?
⚡ At a Glance
- • Signal Switching: DiSEqC-compatible switching for up to four LNB inputs with low insertion loss
- • Best for: Installers and enthusiasts needing simple, reliable multi-satellite selection
- • Not ideal for: Large-scale distribution systems or setups needing motorised dish control
Professional circuit design keeps switching losses low while routing chosen LNB signals. A weather-resistant plastic case allows normal operation outdoors near the dish.
Reliable multi-satellite selection - with DiSEqC-compatible switching logic
An integrated switching chip accepts commands from the satellite receiver to select one of the connected LNBs, with control signals transmitted over the same coaxial cable as RF. Firmware and circuit design ensure the switch responds to receiver-supplied commands for selection.
Switch between satellites without rewiring coax, keeping installations neat and straightforward and avoiding manual cable changes.
Low-loss wideband performance - thanks to professional circuit design
A professional circuit layout and quality components reduce insertion loss across the wideband frequency range used for satellite reception. The design emphasises isolation between inputs to limit interference between feeds.
Cleaner signal paths help maintain picture stability on marginal feeds and reduce the chance of signal leakage affecting reception.
Outdoor-ready durability - with a plastic enclosure for unsheltered use
A sealed plastic shell protects internal circuitry and is specified for normal outdoor operation under unsheltered circumstances. The enclosure allows mounting close to dishes where exposure to weather is likely.
Place the switch beside the dish without an additional shelter, reducing cable runs and simplifying installation near the antenna.
✨ The 4 Key Reasons for DollaTek Diseqc 4-way Wideband Switch
- High isolation – Reduces cross-talk for clearer satellite signals
- Wideband support – Maintains performance across satellite frequency ranges
- Single-coax control – Sends control commands and RF over one coaxial cable
- Easy replacement – Fits as a direct swap for faulty LNB switches in many setups
📋 Technical Details at a Glance
- Category: Wireless
- Brand: DollaTek
- Model: Diseqc 4-way Wideband Switch
- Product ID: B0BRN173JG
- Inputs: 4 LNB inputs
❓ Frequently Asked Questions
Q: Can the switch handle multiple LNBs?
A: Supports selection of up to four LNB inputs, using DiSEqC-compatible switching logic to choose the active feed.
Q: Is the unit suitable for outdoor installation?
A: Designed to work normally outdoors under unsheltered circumstances and supplied with a plastic case shell for protection.
Q: Will it work with my satellite receiver?
A: Compatibility is stated for a range of satellite receivers, with selection made by commands supplied from the receiver.
🏆 Our Verdict
Suitable for satellite installers and keen hobbyists who need dependable selection between several LNBs. Professional switching logic, low-loss circuitry and an outdoor-capable enclosure deliver steady reception and tidy installations. Durable construction and broad receiver compatibility point to solid long-term value for fixed satellite setups.
