Home improvement cordless drill designed to handle drilling, screwing and light hammering with professional-style torque. Dual batteries and a 30-piece accessory kit reduce interruptions and speed up common tasks around the house. Is the JYGMPRO Cordless Drill Driver the only kit most DIYers will need?
⚡ At a Glance
- • Drilling Power: 42N.m max torque with three working modes for drilling, screwing and hammer drilling
- • Best for: DIYers and tradespeople tackling wood, metal, plastic and occasional masonry
- • Not ideal for: Continuous heavy industrial use where mains-powered tools or higher torque are required
Three working modes combine drilling, screwdriving and hammer drilling for a wide range of jobs. Two 2.0Ah Li-ion batteries enable extended, swap-and-go operation with a 90-minute full charge time.
Reliable hole-making and masonry work – thanks to a 3-in-1 hammer drill and 42N.m max torque
Hammer drilling mode applies percussive force while the standard drilling mode uses rotary motion; 42N.m max torque supplies the rotational force needed for dense materials. Two speed ranges, 0-550RPM and 0-1850RPM, let the tool match speed to material and bit size.
Confident drilling into brick, wood and metal without frequent stalls or bit slipping, making renovation and repair tasks quicker and more predictable.
Long, uninterrupted work sessions – with two 2.0Ah Li-ion batteries and a quick 90-minute charge
A pair of removable 2.0Ah batteries allows one battery to run while the other charges, and an integrated battery indicator shows remaining charge. Fast charger completes a full charge in around 90 minutes.
Extended runtime for multi-stage projects, with the option to swap batteries mid-task so progress is not stalled by a flat cell.
Accurate screwdriving control – with a 25-position clutch and two-speed gearbox
A 25-position torque clutch allows incremental selection of drive force to suit different screw sizes and materials, while a two-speed gearbox provides lower speed for torque-heavy tasks and higher speed for rapid drilling.
Reduced risk of overdriven screws and damaged fixings, and easier finishing when assembling furniture or fitting fixtures.
✨ The 4 Key Reasons for JYGMPRO Cordless Drill Driver
- 42N.m Max Torque - Handles brick and dense materials with fewer stalls
- Two 2.0Ah Batteries - Delivers extended runtime for long jobs, quick battery swapping
- 25+3 Position Clutch - Prevents overdriving screws and enables accurate torque control
- 30-piece Accessory Set - Ready for a wide range of tasks straight from the case
📋 Technical Details at a Glance
- Category: Home Improvement, Cordless Drill Driver
- Voltage: 21V
- Max Torque: 42N.m
- Operating Modes: Screwing, Drilling, Hammer Drilling
- Batteries: 2 x 2.0Ah Li-ion
❓ Frequently Asked Questions
Q: How long do the batteries last between charges?
A: Two 2.0Ah Li-ion batteries provide extended runtime by allowing one battery to be swapped in while the other charges, and a full charge takes around 90 minutes.
Q: Can the drill tackle masonry and brickwork?
A: Hammer drilling mode combined with 42N.m max torque is suitable for masonry and brick for occasional or light to moderate tasks, according to user experience with tough materials.
Q: What accessories arrive with the kit?
A: A 30-piece set includes brad point and twist drill bits, impact drill bits, screwdriver bits, a flexible drill shaft, a socket wrench set, a fastening bit, a hex screwdriver holder, a belt clip, charger and a carry case.
🏆 Our Verdict
The JYGMPRO Cordless Drill Driver suits keen DIYers and tradespeople who need a flexible, battery-powered solution for home repairs, furniture assembly and occasional masonry. The stand-out combination of 42N.m max torque, two swap-ready 2.0Ah batteries and a comprehensive 30-piece accessory set makes it a practical all-in-one kit. Strong long-term value comes from the included accessories and 24-month after-sale support, which help maximise usefulness over time.
