Plumbing reducer for joining mismatched PVC pipe sizes, designed to form secure, watertight connections between 75mm and 50mm internal diameters. Confidence for homeowners and tradespeople comes from accurate dimensions and socket-style bonding that withstands everyday use. Is PATIKIL PVC Reducer Pipe Fitting the right connector for your bathroom or sink installation?
⚡ At a Glance
- • Connection Quality: Precision OD and ID measurements create a snug coupling with socket openings for solvent-cement bonding
- • Best for: Home improvers, plumbers and installers connecting unthreaded water supply pipes in kitchens, bathrooms and labs
- • Not ideal for: Installations outside the suggested 5°C to 60°C service range or where threaded metal fittings are required
Straight reducer fittings connect 75mm to 50mm PVC pipes using socket openings sized for solvent-cement bonding. Pack includes two white PVC reducer fittings with clear OD and ID measurements for accurate installation.
Watertight joints - thanks to thickened inner wall
Thickened inner wall increases contact area inside the socket and resists deformation under pressure, aiding alignment and seal retention. Socket openings are designed for solvent-cement bonding, with glue applied inside and outside and insertion within one minute.
Reliable seals reduce the risk of leaks on sinks, bathrooms and laboratory plumbing. Follow the recommended cure schedule for best results, allowing 24 hours before use.
Accurate fit for mismatched pipes - with specified OD and ID measurements
Big diameter measures 83.28mm OD by 75mm ID, small diameter measures 56.36mm OD by 50mm ID, providing clear mating dimensions for both ends. Straight geometry maintains concentric alignment between the two pipe sizes.
Precise sizing means fewer adjustments or improvised adapters during installation. Installers save time and reduce the chance of poor joints that need rework.
Simple, repeatable installation - with socket coupling and clear bonding steps
Sockets accept solvent cement only, with a recommended workflow of applying glue inside and outside, inserting within 1 minute, allowing a 15 minute set, and full use after 24 hours. Glue is not supplied in the pack, so plan to have suitable PVC solvent cement ready.
Straightforward bonding steps speed up jobs and minimise mistakes for both tradespeople and competent DIYers. Two fittings per pack provide a spare or allow two separate connections without delay.
✨ The 4 Key Reasons for PATIKIL PVC Reducer Pipe Fitting
- Precise OD/ID specs - Ensures accurate fit to corresponding 75mm and 50mm pipe sizes
- Straight coupling sockets - Allow fast solvent-cement bonding following simple preparation steps
- Two pieces per pack - Provides a spare or covers two connection points during installation
- Service temperature range - Suitable for installations between 5°C and 60°C reliably
📋 Technical Details at a Glance
- Category: Home Improvement
- Brand: PATIKIL
- Material: PVC with thickened inner wall
- Shape: Straight
- Height: 81mm
❓ Frequently Asked Questions
Q: Is solvent cement included with the fittings?
A: No. Solvent cement is not included, the socket openings must be bonded using PVC special glue applied inside and outside of the pipe before inserting.
Q: What are the exact dimensions for each end?
A: Big end measures 83.28mm OD by 75mm ID, and small end measures 56.36mm OD by 50mm ID, with a total height of 81mm.
Q: Where are these reducer fittings suitable for use?
A: Reducing pipe fittings are suitable for connecting unthreaded water supply pipes in building construction, bathrooms, kitchens, sinks and laboratories, within the suggested 5°C to 60°C service temperature range.
🏆 Our Verdict
Suited to DIYers and tradespeople who need dependable joins between 75mm and 50mm PVC pipes. Accurate dimensions and socket-style solvent-cement bonding make for reliable connections in bathrooms, kitchens and laboratory installations. Durable PVC construction and a two-piece pack deliver practical, long-term value for routine plumbing projects.
