Surface marker buoys are essential for diver safety and clear surface signalling, and the Akozon Diving Marker Buoy aims to deliver high visibility plus dependable inflation. Recreational divers, snorkellers and underwater photographers gain reassurance from a marker that is simple to deploy and attach. Is the construction robust enough for repeated use in busy dive conditions?
⚡ At a Glance
- • Visibility: Reflective tape on both sides increases noticeability during daytime and dusk.
- • Best for: Recreational divers, snorkellers and underwater photographers needing a clear surface marker
- • Not ideal for: Users who require electronic signalling such as lights or GPS tracking
A 6ft surface marker buoy made from 210D nylon with a waterproof TPU cover and reflective tape. A 4.5cm one-way explosion-proof TPU valve plus 316 stainless steel D-rings enable reliable inflation and secure attachment.
High visibility at the surface – thanks to reflective tape on both sides
Reflective strips are applied to both faces of the 6ft SMB so light from boats or shore is reflected back, improving detection in daylight and low-light conditions.
Makes it easier for boat crews and shore support to spot divers during ascent or emergencies, improving on-water safety and confidence.
Secure inflation and controlled deflation – with a 4.5cm one-way explosion-proof TPU valve
A 4.5cm TPU one-way valve seals automatically after inflation to retain air while a pull-cord on the valve allows deliberate discharge when required.
Maintains buoyancy throughout a surface interval while permitting safe, controlled pack-down when the dive is finished.
Durable connections and fabric – thanks to 210D nylon, waterproof TPU and 316 stainless steel D-rings
210D nylon body is covered with waterproof TPU for abrasion resistance, and 316 stainless steel D-rings are fitted at top and bottom for secure attachment.
Holds up to frequent use, clips securely to kit, and reduces the chance of loss during surface transit.
✨ The 4 Key Reasons for Akozon Diving Marker Buoy
210D nylon fabric – Durable construction withstands frequent use and rough handling.
Waterproof TPU cover – Prevents seepage and prolongs buoy service life in wet conditions.
4.5cm one-way TPU valve – Allows secure inflation and quick manual release when necessary.
316 stainless steel D-rings – Strong attachment points reduce risk of loss during surface transit.
📋 Technical Details at a Glance
- Category: Surface Marker Buoy (SMB), Diving Marker Buoy
- Material: 210D nylon fabric, waterproof TPU cover
- Length: 6ft
- Valve: 4.5cm one-way explosion-proof TPU valve
- Attachment: 316 stainless steel D-rings (top and bottom)
❓ Frequently Asked Questions
Q: How visible is the marker in low light?
A: Reflective tape on both sides attracts attention and ensures maximum visibility during daytime or dusk.
Q: How do you inflate and deflate the marker?
A: A 4.5cm one-way explosion-proof TPU valve seals automatically after inflation and allows discharge by pulling a cord on the valve for controlled deflation.
Q: How is the marker attached to kit?
A: 316 stainless steel D-rings on the top and bottom allow easy attachment to a bag or clip and are described as very sturdy and hard to fall off.
🏆 Our Verdict
Suitable for recreational divers, snorkellers and underwater photographers who need a straightforward, reliable surface signal. Reflective tape, robust 210D nylon with a waterproof TPU cover and a one-way valve combine visibility with dependable inflation and secure attachment. While individual kit preferences vary, the construction and specialist design indicate sensible long-term value for frequent water-sports users.
