Automotive parts for electric scooters designed to replace worn wheels quickly and reliably. Confident commuting for riders who need a straightforward tyre and tube swap. The OUXI Electric Scooter Tyre kit asks whether size compatibility and build quality meet everyday urban demands.
⚡ At a Glance
- • Durability: Extra-thick butyl inner tube gives improved tear and abrasion resistance.
- • Best for: Commuters and casual riders using scooters with 10 inch (254mm) wheels.
- • Not ideal for: Scooters fitted with smaller 6.5 inch tyres or non-compatible valve arrangements.
Includes one 10 x 2.125 outer tyre and one matching inner tube with a 0° valve. Three crowbars and two wrenches are supplied to aid home fitting and removal.
Greater puncture resilience - with extra-thick butyl inner tube
Butyl rubber construction offers higher chemical and weather resistance than natural rubber, and thicker wall sections reduce susceptibility to tearing and abrasion. The inner tube design absorbs shocks from rough surfaces to lower puncture risk.
Fewer roadside punctures and longer service life during daily use, which suits riders who cover short commutes on uneven surfaces.
Easier inflation access - thanks to the 0° valve design
A zero-degree valve sits at a shallow angle to the rim, making pump attachment simpler with many standard pumps and compressors. Valve placement reduces awkward bending when fitting pump heads in tight wheel wells.
Quicker inflation at home or at a service point, helping riders keep correct tyre pressure without specialist tools.
Simple home replacement - with included tools and a full tube
The pack contains one outer tyre, one inner tube, three crowbars and two wrenches to remove and refit wheels and seat the tyre bead. A recommended inflation pressure is provided to complete the installation safely.
Allows DIY tyre swaps between journeys, so commuters can restore a wheel without needing immediate workshop help.
✨ The 4 Key Reasons for OUXI Electric Scooter Tyre
- 0° Valve - Easier pump access and faster inflation for regular maintenance
- Complete tool set - Three crowbars and two wrenches for home replacement work
- Recommended PSI 36 - Clear pressure guidance reduces risk of over or under-inflation
- Pre-fit check advice - Water-seal test helps detect leaks before installation
📋 Technical Details at a Glance
- Category: Automotive Parts and Accessories
- Size (Outer Diameter): 254mm (10 inch)
- Inner Diameter: 155mm (6.1 inch)
- Side Width: 54mm (2.125 inch)
- Valve Angle: 0° (shallow/curved valve)
❓ Frequently Asked Questions
Q: Are these tyres compatible with my scooter?
A: Check that the scooter uses 10 inch (254mm) wheels with an inner diameter around 155mm and a side width of 54mm before purchasing, as the kit is intended for those dimensions.
Q: What inflation pressure should be used?
A: A recommended pressure of PSI 36 is provided, and the inner tube should be set and inflated to that level to avoid burst risk.
Q: What comes in the pack for fitting?
A: One 10 x 2.125 outer tyre, one matching inner tube with a 0° valve, three crowbars and two wrenches are supplied for removal and refitting.
🏆 Our Verdict
Ideal for commuters and casual electric scooter riders who need a straightforward, ready-to-fit tyre and tube replacement. Robust butyl inner tubes, a shallow valve for easier inflation and included fitting tools make the kit particularly practical for home repairs. For those seeking reliable, long-lasting replacements that simplify maintenance, the combined tyre-and-tube pack delivers clear value over repeated use.
