Automotive maintenance tool designed to extract diesel and used engine oil quickly for routine servicing. Save time and avoid awkwardly removing a sump, ideal for garage owners and DIYers. Is the compact 12V design robust and safe enough for regular use with a range of vehicles, and how easy is it to operate with existing workshop kit? YaoFaFa Oil Extractor Pump
⚡ At a Glance
- • Suction Power: DC 12V 60W motor with approx. 0.8-1.0 L/min flow for warm motor oil
- • Best for: DIY mechanics and small workshops needing quick oil extraction from 12V vehicles
- • Not ideal for: Pumping petrol, water, paraffin or other easily flammable liquids, per manufacturer warning
12V DC oil extractor with overload protection and a pair of inlet and outlet hoses. Includes battery clamps and hose clips for direct connection to 12V vehicle batteries.
Faster, neater oil changes - with a 12V 60W motor
A 60W DC motor running at 12 volts draws about 5 amps and drives fluid at roughly 0.8 to 1.0 litres per minute for motor oil at 40-60 degrees. The kit uses a thin inlet hose and a thicker outlet hose to maintain steady suction and discharge.
Routine oil drains finish quicker and with less mess than manual draining, so workshop turnaround improves and homeowners spend less time under the car.
Reduced risk of motor damage during use - thanks to overcurrent protection
Built-in overcurrent protection cuts power if the motor is overloaded, preventing the motor from burning out during heavy or prolonged use.
Longer service life and lower chance of sudden failure make the unit dependable for repeated maintenance tasks.
Wide vehicle compatibility - with a 12V connection and included fittings
Supplied with two battery clamps, two hose clamps, one inlet hose and one outlet hose, the pump connects directly to 12V batteries used across cars, boats, motorbikes, trucks, RVs, ATVs, generators, tractors and garden machinery.
One kit covers many machines around the farm or home garage, removing the need for separate tools for each vehicle type.
✨ The 4 Key Reasons for YaoFaFa Oil Extractor Pump
- Overcurrent protection - Prevents motor burn-out during extended extraction sessions
- Complete hose and clamp kit - Ready to use straight from a 12V battery without extra parts
- Compact 12V design - Easy to store and portable for roadside or remote work
- No-sump extraction reported by users - Allows oil change without removing the sump for many engines
📋 Technical Details at a Glance
- Category: Automotive Parts and Accessories
- Type: Oil Extraction Pump
- Brand: YaoFaFa
- Model ID: B0C2DHKL18
- Power: 60W
❓ Frequently Asked Questions
Q: Can the pump be used for petrol or water?
A: Manufacturer warning states the pump is only for diesel and used engine oil; do not use it for petrol, water, paraffin or other easily flammable liquids.
Q: What vehicles are compatible with the pump?
A: The pump runs from a 12V supply and is intended for 12V vehicles and machinery such as cars, boats, motorbikes, trucks, RVs, ATVs, generators, tractors and garden machines.
Q: What is the flow rate and electrical draw?
A: Rated at DC 12V 60W with a current of about 5A, the typical flow for warm motor oil is approximately 0.8 to 1.0 litres per minute.
🏆 Our Verdict
Ideal for DIY mechanics, small workshops and farm users who need a portable way to remove diesel and used engine oil from 12V vehicles. Overcurrent protection combined with the included hoses and clamps makes oil extraction safer and ready to use straight from a battery. Compact, robust design and dependable motor behaviour deliver practical long-term value for routine maintenance.
