A wired surface-mounted contact for garage and rolling door monitoring, built to detect openings and closings reliably. Homeowners who worry about unauthorised entry will appreciate the sturdy metal construction and straightforward fit of PATIKIL Garage Door Magnetic Contacts Switch. Is the wired layout practical for modern alarm setups and DIY installation?
⚡ At a Glance
- • Contact Type: Normally Open (NO) wired magnetic reed switch with a 50-70mm sensing distance
- • Best for: Garage and rolling door monitoring where a robust surface-mounted contact is needed
- • Not ideal for: Installations that require wireless connectivity or battery-powered sensors
Normally Open (NO) reed contact with 55cm wire and a 50-70mm sensing range. Zinc alloy surface-mounted design aims for durable, long-term door monitoring.
Reliable open/close detection - with Normally Open (NO) magnetic reed contact
A Normally Open reed switch closes its circuit when the magnet aligns within the 50-70mm sensing gap, sending a clear wired signal along the 55cm lead. Surface-mounted wiring keeps connections accessible for integration with wired monitoring setups.
Dependable signalling reduces false alarms and ensures consistent detection of door movement. Clear alignment guidance helps maintain reliable operation over time.
Tough, long-lasting construction - with zinc alloy casing and metal components
Zinc alloy housing provides mechanical strength and resistance to everyday wear compared with lightweight plastics. The adjustable bracket secures the contact assembly and maintains alignment under repeated door cycles.
Durable materials help the contact withstand frequent opening and closing, extending service life. Stable mounting reduces the need for readjustments after installation.
Quick DIY installation - with surface-mounted design and included hardware
Surface-mounted contacts attach directly to the inside door frame while the magnet mounts to the door, using the supplied screws and an adjustable bracket for fine alignment. A pre-attached 55cm wire gives immediate reach to nearby wired monitoring inputs.
A straightforward fit makes a fast weekend install realistic for competent DIYers. Included magnet and screws reduce the need to hunt for additional parts.
✨ The 4 Key Reasons for PATIKIL Garage Door Magnetic Contacts Switch
- Zinc alloy construction - Provides durable casing for long-term everyday garage door use
- Adjustable bracket - Allows fine alignment to maintain reliable sensing over time
- Surface-mounted wired design - Simple installation on interior frames for clear wiring routes
- Included screws and magnet - Complete kit reduces extra parts purchases and speeds fitting
📋 Technical Details at a Glance
- Category: Home Improvement
- Contact Type: Normally Open (NO)
- Wire Length: 55cm
- Size: 87.5mm x 37.5mm and 87.5mm x 35mm (L x W)
- Sensing Distance: 50-70mm
❓ Frequently Asked Questions
Q: Is the contact wired or wireless?
A: Wired surface-mounted contact with a 55cm pre-attached lead for connection to wired monitoring systems.
Q: What contact type is used and how close must the magnet be?
A: Normally Open (NO) magnetic reed contact, with an effective sensing distance of 50-70mm for reliable activation.
Q: How should the contact and magnet be positioned during installation?
A: Place the contact on the interior frame and the magnet on the door, ensuring good alignment and secure fixing with the supplied screws.
🏆 Our Verdict
Suited to homeowners and installers who prefer wired door monitoring and robust hardware. Durable zinc alloy construction, an adjustable bracket, and a 50-70mm sensing gap make reliable detection straightforward. While retailers set the cost, the sturdy build and simple wired fit make for a practical long-term choice.
