A condensate pump for heating and air conditioning equipment that automatically removes condensate to protect systems. Homeowners and installers gain peace of mind from reliable, low-maintenance operation. Is AirTech-UK Condensate Pump the right fit for your setup and installation needs?
⚡ At a Glance
- • Pumping Performance: Up to 65 gallons per hour at 1 ft, 50 gph at 5 ft and 30 gph at 9 ft; shut-off at 15 ft
- • Best for: Installers and homeowners needing automatic condensate removal for air con and heating equipment
- • Not ideal for: Large commercial systems requiring higher continuous flow rates and industrial-duty pumps
Vertical centrifugal pump with a stainless-steel motor shaft and a thermally protected, fan-cooled motor. Automatic start/stop plus an overflow detection switch with NO and NC contacts enables equipment shut-down connection.
Reliable condensate extraction - thanks to vertical centrifugal pump design
A vertical centrifugal pump uses an impeller to move condensate efficiently, with flow reducing as vertical lift increases; measured flow is 65 gph at 1 ft, 50 gph at 5 ft and 30 gph at 9 ft.
Consistent removal prevents condensate pooling in air conditioning units, dehumidifiers and condensing boilers, cutting the risk of water damage and reducing service visits.
Longer operational life - with a thermally protected, fan-cooled motor and stainless-steel shaft
Thermal protection guards the motor against overheating while fan cooling supports extended duty cycles; stainless-steel shaft resists corrosion from condensate exposure.
Reduced likelihood of motor failure and corrosion means fewer replacements and less downtime for homeowners and installers.
Safe system integration - with overflow detection switch and check-valved discharge
Overflow detection supplies both NO and NC contacts for wiring into HVAC shutdown circuits, while the 3/8" O.D. barbed discharge adapter includes a built-in check valve to prevent backflow.
Enables automatic equipment shut-down in fault conditions and prevents condensate returning to the drain line, reducing damage risk.
✨ The 4 Key Reasons for AirTech-UK Condensate Pump
- Automatic start-stop - Prevents overflow and reduces manual maintenance visits for installers
- Durable motor shaft - Stainless-steel shaft resists corrosion for longer service life
- Simple installation - Wall mount tabs and barbed discharge speed up setup
- Wide compatibility - Suits air con, dehumidifiers and condensing boilers reliably
📋 Technical Details at a Glance
- Category: Home Improvement, Condensate Pump
- Voltage: 220-240V
- Frequency: 50/60 Hz
- Current: 0.6 A
- Power: 60 W
❓ Frequently Asked Questions
Q: What equipment is the pump compatible with?
A: Suitable for air conditioning units, refrigeration systems, dehumidifiers, condensing furnaces and condensing boilers as listed in the product description.
Q: Does the pump have an automatic shut-off or safety switch?
A: Automatic start and stop operation is standard, and an overflow detection switch with both NO and NC contacts allows connection for equipment shut-down.
Q: How high can the pump lift condensate and what are the flow rates?
A: Flow rates are specified as 65 gallons per hour at 1 ft, 50 gph at 5 ft and 30 gph at 9 ft, with a maximum shut-off height of 15 ft.
🏆 Our Verdict
The AirTech-UK Condensate Pump is suitable for homeowners and installers who need dependable, low-maintenance condensate removal for domestic and light commercial HVAC equipment. Robust construction, motor protection and safety-switch wiring make it straightforward to integrate and keep running. Durable components and automatic controls deliver long-term value through fewer call-outs and reduced maintenance.
