A woodworking honing guide, EZARC Honing Guide promises repeatable, accurate edge angles for chisels and plane irons. A more stable setup gives confidence before every cut and reduces trial and error during sharpening. Is the robust, adjustable design the right fit for a busy workshop?
⚡ At a Glance
- • Sharpening Accuracy: Projection-based angle guidance for repeatable bevels on chisels and plane irons
- • Best for: Woodworkers and hobbyists needing consistent edges across a range of blade sizes
- • Not ideal for: Users preferring powered or automated sharpening systems
Durable cast aluminium construction with anti-rust paint and a bearing wheel for smoother tracking. Fits chisels from 3mm to 47mm and plane irons from 34mm to 79mm, with flat and grooved jaws for different blade types.
Repeatable angle settings - with projection-based angle guide
Angle selection uses the projection of the blade from the clamp, with examples given: chisel projection 30mm equals 30°, 40mm equals 25°; plane iron projection 38mm equals 30°, 50mm equals 25°.
Accurate, repeatable settings remove guesswork when sharpening multiple tools, so each edge matches the intended bevel with minimal testing.
Secure clamping across blade types - with adjustable screw-cap and interchangeable jaws
A screw-cap adjusts the clamping width to accept chisels from 3mm to 47mm and plane irons from 34mm to 79mm, while flat jaws clamp mortise chisels and grooved jaws suit paring chisels and plane blades.
Stable clamping prevents slippage during sharpening, keeping the edge alignment consistent throughout the honing process.
Smoother tracking and consistent bevels - with bearing wheel and processed working face
An ordinary steel wheel is replaced by a bearing wheel for smoother rotation, while the working face is carefully processed to provide precise contact and reliable tracking on the stone.
Even tracking reduces chatter and makes it easier to produce a uniform, polished edge along the entire blade length.
✨ The 4 Key Reasons for EZARC Honing Guide
- Cast aluminium construction - Resists rust and stands up to heavy workshop use
- Wide clamping range - Accepts chisels and plane irons across a 3mm to 79mm range
- Interchangeable jaws - Flat and grooved jaws handle mortise and paring chisels precisely
- Bearing wheel tracking - Smooth wheel rotation improves control for consistent bevels
📋 Technical Details at a Glance
- Category: Woodworking honing guide
- Material: Cast aluminium
- Finish: Anti-rust paint coating
- Clamping width (chisels): 3mm to 47mm
- Clamping width (plane irons): 34mm to 79mm
❓ Frequently Asked Questions
Q: What sizes of chisels and plane irons will it accept?
A: Chisels from 3mm to 47mm in width and plane irons from 34mm to 79mm can be clamped using the adjustable screw-cap and included jaws.
Q: How are angles set and measured?
A: Angles are set by adjusting the blade projection from the clamp, for example chisel projection 30mm equals 30° and 40mm equals 25°, while plane iron projection 38mm equals 30° and 50mm equals 25°.
Q: Can the guide be used with different sharpening stones?
A: Yes, the guide works with both oilstones and waterstones for honing and sharpening.
🏆 Our Verdict
Ideal for woodworkers and hobbyists who need repeatable, accurate edges across a range of chisels and plane irons. Robust cast aluminium construction, bearing-wheel tracking and interchangeable jaws make setting and maintaining bevels straightforward and reliable. While cost may be a consideration, durable build and wide compatibility promise good long-term value.
